-
To run the code on a bare board, you must:
1. Write code (startup code, C code, Makefile);
2. Compile and link;
3. Burning (J-Link)
The three documents in the first phase are as...[Details]
-
On November 5, the 6th China International Import Expo opened, and Qualcomm participated in the event and exhibition for the sixth consecutive year. Over the past six years, Qualcomm has relied on th...[Details]
-
Energy-saving lamps
, also known as energy-saving bulbs, electronic bulbs, compact fluorescent lamps and integrated fluorescent lamps, refer to lighting equipment that combines fluoresc...[Details]
-
PLC control content and working principle
2.1 Constant power excitation control
Constant power excitation control mainly refers to the control of the excitation of the exciter in t...[Details]
-
The PL series of narrow pulse current sources from Pursis Instruments can be used in VCSEL and other test scenarios that require narrow pulse excitation. PL series devices have two channels: ①. Const...[Details]
-
#include "stm32f10x.h" /*RCC clock configuration*/ void RCC_config(void) { ErrorStatus HSEStartUpStatus; /* RCC registers are set to default configuration */ RCC_DeInit(); /* Turn on extern...[Details]
-
Introduction
Consumers want fewer power cords and cables for their devices and want the flexibility of charging from a computer or AC outlet, requiring that nearly all current and future han...[Details]
-
The automotive industry is one of the key sectors driving the development of artificial intelligence (AI) as it works towards the ubiquitous benefits of autonomous vehicles and advanced driver assist...[Details]
-
Use a clamp ammeter with a small range to measure a current close to the full scale. Then, insert the circuit to be checked into the jaws. If the reading decreases, it means there is a short-circuited...[Details]
-
1. Sleep mode 2. Stop mode. In this mode, the IO pins maintain the level in the run state and the RAM remains unchanged. Therefore, before entering this state, configure the IO port first, otherwis...[Details]
-
1 Introduction
In the development and application of embedded systems, choosing low-priced, high-performance LCD devices has always been the goal pursued by designers. Small and medium-sized L...[Details]
-
On the production line, it is often involved in measuring various types of electronic components. A measuring device called an LCR tester is used in the measurement. This measuring device is also fas...[Details]
-
O Introduction At present, the market and embedded system products for scientific research in colleges and universities, such as Vxworks, Linux and Windows CE, are quite mature and provide powerf...[Details]
-
A signal generator is a device that can provide electrical signals of various frequencies, waveforms, and output levels. It is used as a test signal source or excitation source when measuring the amp...[Details]
-
Hardware Platform
S3C2410X is Samsung's S3C2410X chip based on ARM920T. S3C2410X integrates an LCD controller (supports STN and TFT LCD screens with touch screen), SDRAM, touch screen, USB, SP...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
