CRA024RF133RQ10 datasheet, PDF

CRA024RF133RQ10: DescriptionArray/Network Resistor, Isolated, Metal Glaze/thick Film, 0.063W, 133ohm, 25V, 1% +/-Tol, -200,200ppm/Cel, 0804,; File Size455KB，10 Pages; ManufacturerEVER OHMS TECHNOLOGY CO.,LTD.; Websitehttp://www.everohms.com/; Environmental Compliance; Tianer Technology was established in 1988 and has the R&D capabilities and manufacturing technology for chip resistors and arrays. In the face of today's diverse customer needs, we continue to invest in the development of high-quality products and new manufacturing technologies, and provide customers with a one-time purchase service for multiple components to fully meet customer needs and improve customer satisfaction with our products. In terms of quality management, our company has passed ISO-9001, ISO-TS16949, TTQS certification and complies with the AEC-Q200 automotive electronics self-testing standard. We continuously improve the quality of our products and services through the analysis and improvement of product yield rate indicators, customer satisfaction surveys and other reports, in order to enhance customer trust in our company and establish a good partnership with our customers.

Download Datasheet Parametric View All

CRA024RF133RQ10 Overview

Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.063W, 133ohm, 25V, 1% +/-Tol, -200,200ppm/Cel, 0804,

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	990142548
Reach Compliance Code	unknown
ECCN code	EAR99
structure	Chip
JESD-609 code	e3
Network Type	Isolated
Number of terminals	8
Maximum operating temperature	155 °C
Minimum operating temperature	-55 °C
Package height	0.4 mm
Package length	2 mm
Package form	SMT
Package width	1 mm
method of packing	TR, Paper, 7 Inch
Rated power dissipation(P)	0.063 W
resistance	133 Ω
Resistor type	ARRAY/NETWORK RESISTOR
series	CRA
size code	0804
technology	METAL GLAZE/THICK FILM
Temperature Coefficient	200 ppm/°C
Terminal surface	Tin (Sn) - with Nickel (Ni) barrier
Tolerance	1%
Operating Voltage	25 V

CAN bus research notes: 1. When using a module, we need to initialize it accordingly and set the functions we are going to use. Divided into three parts---- 1) Mailbox initialization configuration: First, you should determin...; 灞波儿奔 DSP and ARM Processors

DSP28335—CMD file interpretation: There are two basic sections in the CMD file: the initialization section and the non-initialization section. The initialization section contains codes and constants that must be valid after the DSP is...; 灞波儿奔 DSP and ARM Processors

Recommended introductory video tutorials and books on microcontroller programming, teaching you to learn microcontrollers from scratch.: These days I have seen many students who don’t know how to learn 51 single-chip microcomputers. It is not difficult to learn single-chip microcomputers well. Single-chip microcomputers are a very prac...; fasetr 51mcu

DSP timer and interrupt system realizes variable frequency flashing of LED lights: Using timer interrupt to realize variable frequency flashing of LED lightsThe example is relatively simple, and the source code is directly posted. #include "DSP2833x_Device.h" // DSP2833x Headerfile ...; Jacktang DSP and ARM Processors

STM32F103VE DAC+DMA+TIM, channel 1, no signal output: Using STM32F103VET6 microcontroller, DAC+DMA+TIM2 trigger mode, channel 1 outputs sine wave, refer to the routine configuration, but there is no signal output, the hardware is checked and it is normal...; changming789 stm32/stm8

Show off the Jingdong E-card exchanged with E-coin: [i=s]This post was last edited by yjtyjt on 2019-9-17 20:36[/i]Showing off the Jingdong E-card exchanged with E-coins. I liked some of the coins and exchanged them for a 400 yuan E-card on Jingdong. W...; yjtyjt Talking

Popular Components