Tianer Technology was established in 1988 and has the R&D capabilities and manufacturing technology for chip resistors and arrays. In the face of today's diverse customer needs, we continue to invest in the development of high-quality products and new manufacturing technologies, and provide customers with a one-time purchase service for multiple components to fully meet customer needs and improve customer satisfaction with our products. In terms of quality management, our company has passed ISO-9001, ISO-TS16949, TTQS certification and complies with the AEC-Q200 automotive electronics self-testing standard. We continuously improve the quality of our products and services through the analysis and improvement of product yield rate indicators, customer satisfaction surveys and other reports, in order to enhance customer trust in our company and establish a good partnership with our customers.
[i=s]This post was last edited by zhangjsh on 2018-7-15 11:30[/i] [size=4] [/size] [size=4] [size=5] Today we will disassemble an "Emerson EC3-X33 High-efficiency Superheat Controller". EC3-X33 is a h...
This frequency meter can measure the frequency parameters of continuous carrier signals (walkie-talkies, cordless phones) and digital signals (GSM, CDMA, PHS, wireless remote controls, etc.), with sig...
[i=s]This post was last edited by qwqwqw2088 on 2020-2-23 18:08[/i]Photoelectric detection technology has a wide range of applications in many fields, from simple infrared sensors to fiber optic commu...
There are various test items in the measurement items of the oscilloscope, such as period, frequency, rise time, fall time, delay, positive and negative duty cycle, positive and negative pulse width, ...
My Raspberry Pi doesn't have an external speaker. I usually think it's a bit cumbersome to bring a speaker. But I have a wired mouse. I took it apart and found that there was still space inside. So I ...
[color=#3d3d3d][font="][size=14px]AD7476 is normal when it is first used in the circuit. After running for a period of time, the front-end analog input part is fixed at about 1V and remains unchanged....