RTX125230FETP datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> The resistor> RTX125230FETP

RTX125230FETP: DescriptionFixed Resistor, Thin Film, 0.25W, 523ohm, 200V, 1% +/-Tol, -50,50ppm/Cel, 1210,; CategoryPassive components The resistor; File Size506KB，15 Pages; ManufacturerRALEC; Websitehttps://www.ralec.com/zh-CN; Environmental Compliance; Wang Quan Technology (Kunshan) Co., Ltd. established a back-end taping factory in Kunshan in April 2001, and at the same time started to build a factory on Huangpujiang Middle Road. In December 2002, the new factory was completed and began full manufacturing. Wang Quan's products are SMT chip resistors, including chip resistors, array resistors, and network resistors. The current monthly production capacity is 9 billion PCS, which are mainly used in desktop notebook computers, computer peripheral products, network communications, mobile phones, etc. In order to adapt to the trend of miniaturization of electronic products and the requirements of high precision, the company actively develops smaller and more precise products. The company actively completes certifications that meet international standards, and has successively completed ISO9000, ISO14000 and other certifications. As a member of the global village, Wang Quan must also fulfill its environmental protection responsibilities. Therefore, in 2004, it completed the lead-free electroplating terminal electrode and mass-produced RoHS-compliant products in July 2005. Wangquan adheres to the chairman's business philosophy. Maintaining integrity is the principle of persistence, giving back is the unchanging concept, surpassing is the eternal goal, maintaining talent is the driving force of progress, research and development is the rock of development, and continuous efforts are made to make progress. The company has a total investment of US$100 million, covers an area of 119,000 square meters, and now has more than 2,800 employees. In the next 2-3 years, it will realize the corporate vision of becoming the first in the market share of chip resistors in East China.

Download Datasheet Parametric View All

RTX125230FETP Overview

Fixed Resistor, Thin Film, 0.25W, 523ohm, 200V, 1% +/-Tol, -50,50ppm/Cel, 1210,

RTX125230FETP Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	831163584
Reach Compliance Code	compliant
YTEOL	7.45
structure	Chip
JESD-609 code	e3
Number of terminals	2
Maximum operating temperature	155 °C
Minimum operating temperature	-55 °C
Package height	0.55 mm
Package length	3.05 mm
Package form	SMT
Package width	2.55 mm
method of packing	TR, Paper, 7 Inch
Rated power dissipation(P)	0.25 W
resistance	523 Ω
Resistor type	FIXED RESISTOR
series	RTX
size code	1210
technology	THIN FILM
Temperature Coefficient	50 ppm/°C
Terminal surface	Tin (Sn) - with Nickel (Ni) barrier
Tolerance	1%
Operating Voltage	200 V

RTX125230FETP Preview

RALEC

旺詮

1 Scope:

Thin Film Chip Resistors Product

Specification

Document No.

Released Date

Page No.

IE-SP-018

2011/07/01

1/15

This specification is applicable to lead and halogen free RTX series thin film chip

resistors.

2 Explanation Of Part Numbers:

(EX)

RTX

1002

Type

Lead-Free

Thin Film

Chip Resistors

Size

02(0402)

03(0603)

05(0805)

06(1206)

12(1210)

20(2010)

25(2512)

Nominal Resistance

4－

Digit

E96、E24 Series

EX 10.2Ω =10R2

10KΩ =1002

Resistance

Tolerance

B=± 0.1%

C=± 0.25%

D=± 0.5%

F=± 1%

TCR

B=± 10ppm/℃

C=± 15ppm/℃

D=± 25ppm/℃

E=± 50ppm/℃

Packaging

TH 2 mm Pitch Paper(Taping) 10000 pcs

TP 4 mm Pitch Paper(Taping) 5000 pcs

TE 4 mm Pitch Emboss(Taping) 4000 pcs

3 General Specifications:

Type

Rated

Power at

70℃

1 W

3 W

Max.

Working

Voltage

Max.

Overload

Voltage

T.C.R.

(ppm/℃ )

Resistance Range

B(± 0.1%)

E-96、E24

C(± 0.25%) D(± 0.5%)

E-96

、E24

E-96

、E24

F(± 1%)

E-96

、E24

RTX02

50V

100V

RTX03

75V

150V

RTX05

150V

300V

RTX06

200V

400V

RTX12

200V

400V

RTX20

200V

400V

RTX25

200V

400V

、±

10Ω ~ 100KΩ

10Ω ~ 121KΩ

10Ω ~ 100KΩ

10Ω ~ 681KΩ

10Ω ~ 100KΩ

10Ω ~ 1.5MΩ

10Ω ~ 100K

10Ω ~ 1.5MΩ

10Ω ~ 100K

10Ω ~ 1MΩ

10Ω ~ 100K

10Ω ~ 1MΩ

10Ω ~ 100K

10Ω ~ 1MΩ

－55℃

＋155℃

Operating Temperature Range

Approved

Checked

Written

Remark

IT’ S NOT UNDER CONTROL FOR PDF FILE

Issue Dep.

DATA Center.

PLS NOTE THE VERSION STATED.

Do not copy without permission

Series No.

RALEC

旺詮

Thin Film Chip Resistors Product

Specification

Document No.

Released Date

Page No.

IE-SP-018

2011/07/01

2/15

3.1 Power Derating Curve:

Operating Temperature Range：-55℃〜155℃

For resistors operated in ambient temperatures above 70

℃

, power rating shall be

derated in accordance with figure below.

100

Rated Power ( % )

-55

20 40 60 80 100 120 140 160

155

3.2 Voltage Rating:

Rated Voltage: The resistor shall have a DC continuous working voltage or a rms. AC

continuous working voltage at commercial-line frequency and wave

form corresponding to the power rating, as determined from the

following:

E= Rated voltage (v)

R×P

P= Power rating (w)

R= Nominal resistance(Ω)

4 Dimensions:

Dimensions

TYPE

Size Code

RTX02

RTX03

RTX05

RTX06

RTX12

RTX20

RTX25

0402

0603

0805

1206

1210

2010

2512

1.00± 0.10 0.50± 0.05 0.30± 0.05 0.20± 0.10 0.25± 0.10

1.60± 0.10 0.80± 0.10 0.45± 0.10 0.30± 0.15 0.30± 0.15

2.00± 0.10 1.25± 0.10 0.50± 0.10 0.35± 0.20 0.35± 0.15

+0.10

3.05± 0.10 1.55± 0.10 0.55

-0.05

0.45± 0.20 0.35± 0.15

3.05± 0.10 2.55± 0.10 0.55± 0.10 0.50± 0.20 0.50± 0.20

5.00± 0.20 2.50± 0.20 0.55± 0.10 0.60± 0.20 0.60± 0.20

6.30± 0.20 3.20± 0.20 0.55± 0.10 0.60± 0.20 0.60± 0.20

Remark

IT’ S NOT UNDER CONTROL FOR PDF FILE

Issue Dep.

DATA Center.

PLS NOTE THE VERSION STATED.

Do not copy without permission

Series No.

RALEC

旺詮

Thin Film Chip Resistors Product

Specification

Document No.

Released Date

Page No.

IE-SP-018

2011/07/01

3/15

5 Structure Graph:

Ceramic substrate

Bottom inner electrode

Top inner electrode

Resistive layer

Protective coating

Marking

Terminal inner electrode

Ni plating

Sn plating

Remark

IT’ S NOT UNDER CONTROL FOR PDF FILE

Issue Dep.

DATA Center.

PLS NOTE THE VERSION STATED.

Do not copy without permission

Series No.

RALEC

旺詮

Thin Film Chip Resistors Product

Specification

Document No.

Released Date

Page No.

IE-SP-018

2011/07/01

4/15

6 Reliability Test

6.1 Electrical Performance Test

ITEM

Conditions

Specifications

Resistors

Refer to item 3. general specifications

（

R2－ R1）

Temperature

TCR（ppm/℃）＝

R1（ T2－ T1）

Coefficient of

Resistance

R1: Resistance at room temperature

R2: Resistance at -55℃ or +125℃

T1: Room temperature

T2: Temperature -55℃ or +125℃

Refer to JIS-C5201-1 4.8

Short Time

Overload

Applied 2.5 times rated voltage for 5 seconds and

(0.5%＋0.05Ω)

release the load for about 30 minutes ,

then

measure its

resistance variance rate. (Rated voltage refer to item 3. No evidence of mechanical damage.

general specifications)

Refer to JIS-C5201-1 4.13

Put the resistor in the fixture, add 100 VDC in + ,- terminal for

≧10

60 sec then measured the insulation resistance between

electrodes and insulating enclosure or between electrodes and

base material.

Refer to

JIS-C5201-1 4.6

Insulation

Resistance

Put the resistor in the fixture, add VAC (see SPEC below) in +,- No short or burned on the appearance

terminal

for.

RTX02、03 apply 300 VAC 1 minute.

RTX05、06

、12 、20 、25

apply 500 VAC 1 minute.

Refer to

JIS-C5201-1 4.7

Intermittent

Put the tested resistor in chamber under temperature 25± 2℃

(0.5%＋0.05Ω)

Overload

and load the rated DC voltage for 1 sec on , 25 sec off ,

10000

+400

test cycles, then it be left at no-load for 1 hour ,then

measure its resistance variance rate.

Refer to JIS-C5201-1 4.13

Resistance

Noise

Noise Level

Refer to JIS-C5201-1 4.12

＜100Ω

100Ω

≦R＜1KΩ

1KΩ

≦R＜10KΩ

10KΩ

≦R＜100KΩ

100KΩ

≦R＜1MΩ

1MΩ

≦R

≦-10db(0.32

uV/V)

≦

0db(1.0 uV/V)

≦

10db(3.2 uV/V)

≦

15db(5.6 uV/V)

≦

20db(10 uV/V)

≦

30db(32 uV/V)

Dielectric

Withstand

Voltage

Remark

IT’ S NOT UNDER CONTROL FOR PDF FILE

Issue Dep.

DATA Center.

PLS NOTE THE VERSION STATED.

Do not copy without permission

Series No.

RALEC

旺詮

Thin Film Chip Resistors Product

Specification

Document No.

Released Date

Page No.

IE-SP-018

2011/07/01

5/15

6.2 Mechanical Performance Test

ITEM

Conditions

Specifications

Resistors

Core Body Applied test probe at its central part then pushing 10N½

(0.5%＋0.05Ω)

No evidence of mechanical damage.

Strength 1.02 Kgf½ force on the sample for 10 sec.

No side conductive peel off.

1.RTX02、03：probe R0.2

2.RTX05、06、12、20、25：probe R0.5

Refer to JIS-C5201-1 4.15

Terminal Test1:The resistor mounted on the board applied 5N

Test1: No evidence of mechanical

strength

pushing force on the sample rear for 10 sec.

damage.

Test2:The resistor mounted on the board slowly add

Test2:

≧5N

force on the sample rear until the sample

termination is breakdown.

Refer to JIS-C5201-1 4.16

Resistance to The tested resistor be immersed into isopropyl alcohol of

(0.5%＋0.05Ω)

solvent

20~25℃ for 5± 0.5 min, then the resistor is left in the

room for 48 hr, and measured its resistance variance

No evidence of mechanical damage,

rate.

no G2 overcoating and Sn layer by

Refer to JIS-C5201-1 4.29

leaching.

Solderability Preconditioning

1.Test item 1:

Put the tested resistor in the apparatus of PCT, at a

Solder coverage over 95%

temperature of 105℃, humidity of 100% RH, and

2.Test item 2:

pressure of 1.22× 10 Pa for a duration of 4 hours. Then Zero cross time within 3 seconds.

after left the tested resistor in room temperature for 2

hours or more.

Test method:

◎Test

item1 (solder pot test):

The resistor be immersed into solder pot in

temperature 235± 3℃ for 2± 0.5 sec, then the resistor

is left as placed under microscope to observed its

solder area.

◎Test

item2 (wetting balance method):

Add flux into resistors, then put resistor into wetting

balance machine, refer to condition as below, then

must be measured and recorded its time changed.

Testing conditions for wetting balance method with solder pot

Condition

Solder temperature

Immersion speed

Immersion depth

Immersion angle

235± 3℃

1 to 5 mm/s

0.10 mm

Horizontal

25mg

→0402、0603

Mass of solder ball 200mg

→0805、1206 、1210 、

2010、2512

Refer to JIS-C5201-1 4.17

Remark

IT’ S NOT UNDER CONTROL FOR PDF FILE

Issue Dep.

DATA Center.

PLS NOTE THE VERSION STATED.

Do not copy without permission

Series No.

More (Only the first 5 pages are displayed. Please Download Datasheet to view the full content.) >

Recommended Resources

Ultra-high voltage module circuit schematic diagram

RTD temperature measurement circuit

Infrared light control switch circuit diagram 1

High efficiency Zhengxuan inverter circuit

LM388 with gain of 20 and load connected to +U

DZW75-48/50(50II) drive circuit

[Pingtou Ge RVB2601 Creative Application Development] + Smart Home Assistant Based on Pingtou Ge RVB2601: [i=s]This post was last edited by DDZZ669 on 2022-6-4 21:28[/i]Smart home assistant based on RVB2601Author: Coder Loves LearningProject BackgroundToday, we have entered the era of the Internet of Ever...; DDZZ669 XuanTie RISC-V Activity Zone

Showing goods + collecting boards for three years: Seeing that the big guys on the forum are showing off their boards, I want to do it too. I am a newbie and don't have as many collections as the big guys, so I can only show a simple one. The followin...; lehuijie Special Edition for Assessment Centres

Oscilloscope hardware bandwidth limitation and high-pass and low-pass digital filtering functions: The function of an oscilloscope is to transform invisible electrical signals into visible images. The better the oscilloscope, the better it can restore the true appearance of the signal. We certainly...; Micsig麦科信 Test/Measurement

The sensor driver for X-NUCLEO-IKS01A3 will soon be available in MakeCode: The sensor MakeCode drivers for the X-NUCLEO-IKS01A3 board that I wrote have been approved by MEF (Micro:bit Educational Foundation) and will soon be officially available in MakeCode. If you design re...; dcexpert ST Sensors & Low Power Wireless Technology Forum

【AT-START-F425 Review】 3. GPIO Lighting and Button Evaluation: The development board of Arty F425 feels quite close to development, the functions are relatively intuitive, and the codes are also intuitive. According to the evaluation progress, GPIO lighting and b...; kit7828 Domestic Chip Exchange

TMS320C6678 Development Routine User Manual Study 4: Check whether the emulator is installed successfully The following TMS320C6678 development uses the TL-XDS560V2 emulator as an example. Power off the development board, connect the emulator and the de...; 火辣西米秀 Microcontroller MCU

Popular Components