VTF-1.250V2-25-2.5/A07-T-S datasheet, PDF

VTF-1.250V2-25-2.5/A07-T-S: DescriptionOscillator; CategoryPassive components oscillator; File Size228KB，2 Pages; ManufacturerChenjing Electronics

Download Datasheet Parametric View All

VTF-1.250V2-25-2.5/A07-T-S Overview

Oscillator

Parameter Name	Attribute value
Objectid	7340186106
package instruction	DIP-14/4
Reach Compliance Code	unknown
Ageing	1 PPM/YEAR
Frequency Adjustment - Mechanical	NO
Frequency offset/pull rate	25 ppm
frequency stability	2.5%
Installation features	THROUGH HOLE MOUNT
Number of terminals	14
Nominal operating frequency	1.25 MHz
Maximum operating temperature	70 °C
Minimum operating temperature
Oscillator type	CMOS/TTL
physical size	20.4mm x 12.9mm x 10.8mm
Maximum supply voltage	2.94 V
Minimum supply voltage	2.66 V
Nominal supply voltage	2.8 V
surface mount	NO
maximum symmetry	55/45 %

The MCU cannot run in DC-DC mode of BLUENRG-1: In the DC-DC mode of BLUENRG, the voltage output is only about 0.5V, and the output of LDO is also only about 0.5V. The MCU cannot operate normally, and the SWD interface cannot be detected using J-li...; suwithin ST - Low Power RF

micropython update: 2020.7: zephyr/make-minimal: Disable FAT and LFS2 options to make it build. zephyr: Implement machine.Pin.irq() for setting callbacks on pin change. lib/utils: Protect all of mpirq.c with MICROPY_ENABLE_SCHED...; dcexpert MicroPython Open Source section

Disassembling AirTags: The coil, magnet and diaphragm in the ring-shaped motherboard work together, and the body is the speaker: Source: iFixit, Layout: EETWeChat Official Account: Chip Home Recently, iFixit, a well-known repair and disassembly organization, disassembled Apple's latest Bluetooth tracker AirTags and shared multi...; eric_wang Making friends through disassembly

Serial communication and LCD display: When sending characters through the serial port for the first time, the program can enter the interrupt processing function and the LCD displays "b". When sending characters again, the program cannot ...; 搞不明白额 ARM Technology

Detailed explanation of several triggering modes of oscilloscope: Let’s first briefly review what oscilloscope triggering is. Since signals are changing all the time, if we display them all on an oscilloscope, it will be very messy and we can't see clearly, so we ca...; Micsig麦科信 Test/Measurement

Update the image: There are two methods as follows:1. TFTP updatea. Put the update file on the TFTP server.Files:my_environment.scr,myimx6ek200-6q-1g.dtb,zImage-myimx6a9 b. Set up Ethernet. Computer IP: 192.168.137.100...; 明远智睿Lan Industrial Control Electronics

Popular Components