-
In terms of display technology, LCD is a display screen composed of liquid crystals, while LED is a display screen composed of light-emitting diodes. Each pixel unit in an LED digital display is a ...[Details]
-
The reason why the chip is called "flip chip" is relative to the traditional metal wire bonding connection method (WireBonding) and the process after ball implantation. The electrical surface of the ...[Details]
-
It is not difficult to get started with microcontrollers. This is an old article from a few years ago. It is easy to understand and shared with beginners. This little crab with eight legs is our fi...[Details]
-
The AI trend that swept the world in 2023 has heated up the concept of embodied intelligence.
Humanoid robots,
which are regarded as the ideal carriers of embodied intelligence
, have...[Details]
-
For the convenience of operation, people use touch screens instead of mice or keyboards. When working, we must first touch the touch screen installed on the front of the display with our fingers or...[Details]
-
The Internet of Things has opened up a world full of new possibilities for us, in which almost everything is connected. So in terms of the future, what aspects should the Internet of Things be deploy...[Details]
-
"New energy" is a hot word nowadays, and many companies around the world are busy developing related new products. Let's continue to talk about "small things", small things in the power supply catego...[Details]
-
The following content is from the R&S manual "FSW_UserManual_en_46" (1) About Scan Points and Trace Mapping Samples to sweep Points with the Trace Detector A trace displays the values measured at...[Details]
-
Next, let's look at the code in the header file key.h: #ifndef __KEY_H #define __KEY_H #include "sys.h" #define KEY0 GPIO_ReadInputDataBit(GPIOE,GPIO_Pin_4) //PE4 #define KEY1 GPI...[Details]
-
This design introduces in detail a design scheme and implementation method of a digital capacitance measuring instrument based on a single-chip microcomputer. The main design method is to use a 555 c...[Details]
-
Thermocouple is one of the most commonly used temperature detection elements in industry.
Its advantages are:
① High measurement accuracy. Because the thermocouple is in direct contact with the...[Details]
-
The programmable logic controller used in industry is equivalent to or close to a compact computer host. Its advantages in scalability and reliability make it widely used in various industrial cont...[Details]
-
Investment Points
On December 8, the Ministry of Industry and Information Technology officially issued the "12th Five-Year Plan" for the Internet of Things, information security, and software and...[Details]
-
1. Working principle of temperature probe
In the circuit shown in the figure, resistors R1-R3, diodes V1-V3, and transistor V1 form a temperature sensor circuit. Among them, VD1 and VD2 are co...[Details]
-
Recently, the National Highway Traffic Safety Administration (NHTSA) of the United States launched an investigation into 2.4 million vehicles equipped with Tesla's fully autonomous driving (FSD) so...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD