1N5393

Features

Product Name: 200V 1.5A General Purpose Plastic Rectifier

Product model: 1N5393

FEATURE：

Molded case feature for auto insertion

High current capability

Low leakage current

High surge capability

High temperature soldering guaranteed:

250℃/10sec/0,375” (9.5mm) lead length at 5 lbs tension

MECHANICAL DATA：

Terminal: Plated axial leads solderable per

MIL – STD 202E, method 208C

Case: Molded with UL-94 Class V-O recognized flame retardant epoxyt

Polarity: Color band denotes cathode

Mounting position:Any

Technical Parameters:

Maximum Ratings and Characteristics (Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20%)

Maximum Repetitive Peak Reverse Voltage,VRRM：200V

Maximum RMS Voltage,VRMS：140V

Maximum DC Blocking Voltage, VDC：200V

Maximum Average Forward Rectified Current (9.5mm lead length,at Ta=70℃）, IF(AV)：1.5A

Peak Forward Surge Current （8.3ms single half sine-wave superimposed on reated load）,IFSM：50A

Maximum Instantaneous Forward Voltage (at rated forward current), VF：1.4V

Maximum Fullload Reverse Current (full cycle at TL=70℃). IR(AV)：300μA

Maximum DC Reverse Current (at rated DC blocking voltage),IR：5.0μA(Ta=25℃) 300μA(Ta=150℃)

Typical Junction Capacitance (Note1),CJ：20pF

Typical Thermal Resistance (Note2),R(ja)：50℃/W

Storage and Operating Junction Temperature, TSTG/TJ：-50 to +175℃

Note:

1．Measured at 1.0MHz and applied reverse voltage of 4.0Vdc

2．Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C board mounted