P6SMBJ8.0-AU_R2_000A1 datasheet, PDF

Datasheet> All Categories > Discrete semiconductor> diode> P6SMBJ8.0-AU_R2_000A1

P6SMBJ8.0-AU_R2_000A1: DescriptionTrans Voltage Suppressor Diode, 600W, 8V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, SMB, 2 PIN; CategoryDiscrete semiconductor diode; ManufacturerPANJIT; Websitehttp://www.panjit.com.tw/; Environmental Compliance; PANJIT is a global IDM that offers a broad product portfolio including MOSFETs, Schottky diodes, SiC devices, bipolar junction transistors and bridges. The company aims to meet the needs of customers in various applications such as automotive, power, industrial, computing, consumer and communications. Their vision is to power the world with reliable quality, energy-efficient and efficient products, bringing a greener and smarter future to people. The company's core values include innovation, responsibility, customer-centricity, learning and growth, mutual trust and collaboration.

Download Datasheet Parametric View All

P6SMBJ8.0-AU_R2_000A1 Overview

Trans Voltage Suppressor Diode, 600W, 8V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, SMB, 2 PIN

P6SMBJ8.0-AU_R2_000A1 Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	PANJIT
package instruction	R-PDSO-C2
Reach Compliance Code	_compli
ECCN code	EAR99
Other features	UL RECOGNIZED
Maximum breakdown voltage	11.3 V
Minimum breakdown voltage	8.89 V
Configuration	SINGLE
Diode component materials	SILICON
Diode type	TRANS VOLTAGE SUPPRESSOR DIODE
JEDEC-95 code	DO-214AA
JESD-30 code	R-PDSO-C2
Maximum non-repetitive peak reverse power dissipation	600 W
Number of components	1
Number of terminals	2
Maximum operating temperature	150 °C
Minimum operating temperature	-55 °C
Package body material	PLASTIC/EPOXY
Package shape	RECTANGULAR
Package form	SMALL OUTLINE
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
polarity	UNIDIRECTIONAL
Guideline	AEC-Q101; IEC-61000-4-2; TS 16949
Maximum repetitive peak reverse voltage	8 V
surface mount	YES
technology	AVALANCHE
Terminal form	C BEND
Terminal location	DUAL
Maximum time at peak reflow temperature	NOT SPECIFIED

P6SMBJ8.0-AU_R2_000A1 Preview

Download Datasheet

View All

P6SMBJ-AU SERIES

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watts

STAND-OFF VOLTAGE

5 to 220 Volts

Recongnized File # E210467

0.155(3.94)

0.130(3.30)

0.083(2.11)

0.075(1.91)

0.185(4.70)

0.160(4.06)

0.012(0.305)

0.006(0.152)

0.096(2.44)

0.083(2.13)

0.050(1.27)

0.030(0.76)

0.220(5.59)

0.200(5.08)

FEATURES

• For surface mounted applications in order to optimize board space.

• Glass passivated junction

• Low inductance

• Plastic package has Underwriters Laboratory Flammability

Classification 94V-O

• High temperature soldering : 260°C /10 seconds at terminals

• Acqire quality system certificate : TS16949

•

AEC-Q101 qualified

• Lead free in comply with EU RoHS 2011/65/EU directives

• Green molding compound as per IEC61249 Std. . (Halogen Free)

MECHANICAL DATA

• Case: JEDEC DO-214AA,Molded plastic over passivated junction.

• Terminals: Solder plated,solderable per MIL-STD-750,Method 2026

• Polarity: Color band denotes cathode end

• Standard Packaging: 12mm tape (EIA-481)

• Weight: 0.003 ounce, 0.093 gram

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types P6SMBJ5.0 thru types P6SMBJ220.

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.

For Capacitive load derate current by 20%.

Rating

Peak Pulse Power Dissipation on 10/1000μs waveform (Notes 1,2, Fig.1)

Peak Forward Surge Current 8.3ms single half sine-wave

superimposed on rated load (JEDEC Method) (Notes 2,3)

Peak Pulse Current on 10/1000μs waveform (Notes 1) Fig.3

Typical Thermal Resistance Junction to Air (Notes 2)

Operating Junction and Storage Temperature Range

Symbol

FSM

PPM

θJA

STG

Value

600

100

see Table 1

-55 to +150

Units

Watts

Amps

C/W

NOTES :

1. Non-repetitive current pulse, per Fig.3 and derated above T

= 25

C per Fig. 2.

2. Mounted on 5mm

(0.13mm thick) land areas.

3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maxi mum.

4. A transient suppressor is selected according to the working peak reverse voltage (V

RWM

), which should be equal to or

greater than the DC or continuous peak operating voltage level.

October 24,2012-REV.07

PAGE . 1

Recommended Resources

Oscillation process of multivibrator b

The principle and maintenance circuit of emergency lights

Digital multimeter using voltage regulator circuit diagram

PCM (pulse code modulation) circuit for microwave transmitter

M50111P/AP/By/CF (VCR, TV and audio equipment) 30-function infrared remote control receiving circuit

820e computer motherboard circuit diagram_25

Application of DSP repetitive control technology in inverter power supply system: This paper proposes a DSP repetitive control scheme, which uses a repetitive controller to track the periodic reference command signal, reduce the output voltage harmonics, and improve the dynamic per...; Jacktang DSP and ARM Processors

Regarding the calculation of the values of TA0CCR1 and TA0CCR2 configured by the PWM library function: According to this library function, from the TA0_PWM_Init() function, if working in dead zone mode, channel 1 works in mode 6 and channel 2 works in mode 2, then in the TA0_PWM_SetPermill() function c...; baqs603 TI Technology Forum

What does the Y axis of the graph displayed by the baud meter mean? For example, if it starts at 5DB and ends at -100DB, how do you understand it? Attenuation signal...: What does the Y axis of the graph displayed by the baud meter mean? For example, how do you understand the starting value of 5DB and the final value of -100DB? How do you understand the strength of th...; QWE4562009 Integrated technical exchanges

Ask SAMD21 question: I would like to ask if I need to set the fuses and burn the BOOTLOADER before uploading the program to the newly bought SAMD21 blank chip?...; djzoom Microchip MCU

LORA SX1308: Why is there no specific register description in the Semtech SX1308 datasheet? How can I verify that the SX1308 is communicating properly?...; yangzhengqing Wireless Connectivity

Newbie question: When using the PCB antenna library, one of the antenna pins is not connected. I want to know how to solve it.: [i=s]This post was last edited by haha丶 on 2021-5-17 16:40[/i]When using the PCB antenna library, one of the antenna pins is not connected. I want to know how to solve it. The software is AD18Also, ho...; haha丶 PCB Design

Popular Components