-
Spectrum analyzers are relatively expensive, so when using them, we should choose a relatively stable bed or support surface to avoid accidents such as falls or burns. The spectrum analyzer should ...[Details]
-
The difference and comparison between
switching
power supply
and linear series voltage-stabilized
power supply
: Voltage-stabilized power supply is a power s...[Details]
-
0 Introduction Traditional human-computer interaction relies on complex keyboards or buttons. With the development of science and technology, some new human-computer interaction methods have also b...[Details]
-
July 2, 2024 Nidec Motor (Dalian) Co., Ltd. (hereinafter referred to as "Nidec Motor (Dalian)") was awarded the "Excellent Customer Service Award" by Nexteer Automotive Systems Co., Ltd. and the "E...[Details]
-
Battery or DC voltage measurement To measure DC voltage, you must first ensure that the channel coupling mode is in the DC state. For example, the battery voltage is relatively low, so the probe atte...[Details]
-
In the power supply system, the MOSFET driver is generally used only to convert the output signal of the PWM control IC into a high-speed, high-current signal so as to turn the MOSFET on and off ...[Details]
-
The winding is always wound over at least two stator teeth. In concentrated winding, one stator tooth is wound. Both types of winding have different advantages and disadvantages.
When to...[Details]
-
Introduction Today, high-performance power systems have come a long way, and designers are using multiple input voltages to drive multiple voltage rails for a wide variety of applications. The ne...[Details]
-
OBC is a power electronic device for charging automobile power batteries, namely, on-board charger, or OBC for short.
I. Definition
The on-board charger of electric vehicles adopts ...[Details]
-
1. AREA The AREA directive is used to define a code segment or a data segment. Syntax format: AREA segment name attribute 1, attribute 2, ... If the segment name starts with ...[Details]
-
Recently, NavInfo released an announcement stating that the company's controlled subsidiary Beijing Liufen Technology Co., Ltd. (hereinafter referred to as "Liufen Technology") plans to increase capi...[Details]
-
Take MSP430F2274 as an example. The assembly implementation uses IAR assembly, and the CCE assembly implementation can be slightly modified. 1. The watchdog has three working modes: stop mode, timer ...[Details]
-
HCCA HCCA is a 256-byte memory structure that system software uses to send or receive special control and status information to or from HC. It is 256-byte aligned. The HcHCCA in the HC register poi...[Details]
-
The USB firmware is divided into a general enumeration configuration part and a class protocol part. Taking the use of the CH375 host-side protocol to communicate with a large-capacity storage devi...[Details]
-
USB Type-C® (USB-C®) is an industry-wide universal connector that supports data and power transfer over a single interface for applications such as personal electronics, automotive, industrial, and...[Details]