-
July 9, 2024, Shanghai -
At the world-renowned Munich Shanghai Electronics Show (electronica), Shanghai Analog Semiconductor Technology Co., Ltd. (hereinafter referred to as "Analog Semiconduct...[Details]
-
The current status and existing problems of FCS technology application in China
This paper describes the existing problems of fieldbus technology and its current application sta...[Details]
-
ZS-Handling has launched a non-contact photovoltaic wafer handling system that uses ultrasonic air bearings as a new way to handle crystalline silicon wafers. ZS-Handling's non-contact photovoltaic...[Details]
-
Single tube low frequency voltage amplifier circuit
The resistor-capacitor coupling voltage-dividing bias common emitter voltage amplifier circuit is shown in Figure 3.7a.1. The bipolar transist...[Details]
-
IIC 1. What is the role of IIC? Interspersed: The pull-up resistor is usually connected to the power supply, and the pull-down resistor is usually connected to the ground. Pull-up resistor functio...[Details]
-
Maxim Integrated Products introduces the TacTouch tactile actuator
controller
MAX11836, which is suitable for single/multilayer piezoelectric actuators and electroactive polymer actuators (...[Details]
-
This article introduces a new type of LCD display system for displaying measurement results in the power grid quality detection system. It is mainly composed of PIC18F458 and LCD display module MGLS1...[Details]
-
The CSA/UL/IEC
61010
series of standards apply to laboratory equipment, measuring instruments, and production process control instruments. The CSA/UL61010 standard is based on the IEC61010 stan...[Details]
-
When talking about BYD Su Rui, my first reaction is its remote control function. Practicality aside, it is cool enough. But it is still a bit inconvenient to use the key remote control and the directi...[Details]
-
Many designs use astable multivibrators based on logic elements. The simplest approach is an RC feedback loop around a single inverting Schmitt-trigger converter (Figure 1). The output charges th...[Details]
-
1) Hardware:
II) Procedure part:
#include REG51.H
#include ABSACC.H
#define uchar unsigned char
#define uint unsigned int
#define ADC0809 XBYTE
uchar code SEG7 ={0x3f,0x06,0x5b,0x4...[Details]
-
Instruction encoding format and classification
Addressing mode
Data transfer instructions
Arithmetic instructions
Logical operation instructions
Contr...[Details]
-
In this lesson, we will learn about RS-232C serial communication standards and an introduction to RS-232C serial communication interface technology for microcontrollers and computers, laying a solid f...[Details]
-
1. Design of USB interface based on DSP
1 Introduction
The data processed by DSP often needs to be transferred to PC for storage and reprocessing, so the high-speed communication problem betw...[Details]
-
Silicon Labs and many IoT ecosystem and platform partners successfully held the 2024 Shanghai Works With Developer Conference
Keynote speeches, guest speeches, roundtable forum...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD