NGCN/1CS7C2WX-M001

Causes of Winding Short Circuit in Asynchronous Motors (1) The motor runs under overload or overvoltage for a long time, causing the current in the winding to be too large and heat up, which a...[Details]

SECTION 2 Let's talk about TC first. It stands for Transmission Complete. The interrupt is triggered after a byte is sent, which is called "interrupt after sending". It is the same as the original...[Details]

"The potential for diverse applications of AI is enormous. For Intel, participating in the AI ​​transformation of so many customers is a very exciting journey. Only Intel can provide this breadth and...[Details]

　　1 Hardware circuit composition principle 　　According to the types and pin arrangements of currently commonly used transistors, the designed automatic discrimination circuit includes four parts: c...[Details]

    introduction 　　With the development of embedded technology and communication technology, smart phones have become the mainstream trend of mobile phone development in the field of mobile phones. ...[Details]

A parameter rarely appears alone. Many of our customers have implemented hundreds or thousands of parameters in their applications in order to parameterize (i.e. apply) the software in the veh...[Details]

Han's Laser Technology Industry Group Co., Ltd. provides a complete set of laser processing solutions and related supporting facilities for domestic and foreign customers. Its main products include l...[Details]

　　When using the induction type voltage tester introduced in this example, just put its sensing end close to the wire of the mains power grid to detect whether the wire is energized without touching t...[Details]

7 working modes: fiq/irq/abt/und/sys/usr/svc. Switched by "MSR cpsr_c,#0xdx". Enters svc mode at power-on. The difference between svc and usr is that svc can switch to any other mode freely through...[Details]

　　Multi-channel pulse amplitude analyzers and ray spectrometers are commonly used instruments in nuclear monitoring and technical applications. In the 1990s, foreign countries had already introduced ...[Details]

There are two major factors currently affecting the future of vehicle transportation and semiconductor technology. The industry is taking exciting new approaches to power our cars with clean energy w...[Details]

Electromagnetic flowmeters are widely used in various industries, such as petroleum, chemical industry, etc. For the selection of electromagnetic flowmeters, the most important thing is the selection...[Details]

Author: by Giusy Gambino, Marcello Vecchio, Filippo Scrimizzi STMicroelectronics, Catania, Italy When doing distributed intelligence design in automotive power management systems, for intelligent p...[Details]

Recently, Yole, an internationally renowned market research company, released an industry research report titled "LiDAR for Automotive and Industrial Applications". Among them, in the ADAS LiDAR segm...[Details]

On November 4, Nokia issued a press release on October 31, announcing that the company was selected by the European public-private partnership Smart Networks and Services Joint Undertaking (SNS JU)...[Details]