-
The USART of STM32F10x supports DMA mode and can generate an interrupt after DMA is completed. This is very helpful for application scenarios that need to receive or send large amounts of data.
F...[Details]
-
On August 8, Zhongxin Jianhai Semiconductor Technology (Anhui) Co., Ltd. (hereinafter referred to as Anhui Zhongxin Jianhai) successfully completed the trial production of its ceramic thin-film hybri...[Details]
-
Recently, the media theworldfolio interviewed Toshiki Kawai, President and CEO of Tel. During the interview, he said that "without TEL's technology, it would be impossible to manufacture the most adv...[Details]
-
This article will introduce the solution of FPGA-based wireless charger receiver system. The wireless charger receiver strictly follows the latest WPC Qi standard. The receiver system contains an a...[Details]
-
Jiwei.com reported on December 2 that the formation of the new Honor is in full swing. According to Tencent's "First Line", at the recent first internal strategic meeting, the top management of the n...[Details]
-
This paper mainly explains the principle of the traditional Gardner algorithm, then gives the improved design and FPGA implementation method, and finally simulates and analyzes the results to prove t...[Details]
-
Edge computing mainly includes the following four parts: low latency, AI computing power, low power consumption, and security and confidentiality. These four are very important components of edge aut...[Details]
-
In the display, different types of FLASH chips are required to save OSD setting parameters and call preset display modes, enable the host to discover the display model, and store MCU program data.
...[Details]
-
Recently, TE Connectivity (TE) was invited to attend the China-Switzerland Economic Forum, one of the largest economic summits between China and Switzerland. As a global industry technology company h...[Details]
-
#include"type.h"
BETY_BIT status;
//code P_scanf_data_led_7 = {0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};
code N_scanf_data_led_7 = {0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F,0x77,0x...[Details]
-
Overview
The MAX5181 is a 10-bit, current-output digital-to-analog converter (DAC) designed for signal reconstruction or arbitrary waveform generation applications requiring low distortion...[Details]
-
The magnetic flap level gauge is a liquid level measuring instrument that works on the principle of magnetic coupling and buoyancy. It can be said that the key component for the magnetic flap level ...[Details]
-
/*============================================================================= Access the EEPROM on the PIC16F877A chip and run the program: Begin Test - LED0, EEPROM Test OK- LED7 ...[Details]
-
The device is AEC-Q200 compliant and only 3 mm high, saving space in automotive underhood environments
MALVERN, Pa. — August 23, 2021 — Vishay Intertechnology, Inc. has expanded its
...[Details]
-
01
Background
Electric vehicles (EVs), including battery electric vehicles (BEVs) and fuel cell vehicles (FCVs), are considered promising solutions for achieving zero carbon emissions and...[Details]
Linux and Android
京公网安备 11010802033920号
EEWORLD