宋体]First enter the virtual machine and select the network connection. Change Wired to NO. Then click Open in Terminal. Then enter the operation interface. First enter the EPEL software package install...
1. Low power consumption + interruption
Main function{turn off watchdogset system clockinitialize peripherals such as display initializetimer and other internal resources enableglobal interruptenter l...
I am now using an 80-pin DSP28035 to make a control circuit with an operating frequency of 60MHZ. When drawing lines on the PCB, what is the approximate line width and line spacing, and how do I choos...
This week I downloaded the FLASH software from the official website.
I also downloaded the firmware for the audio development board. https://docs.ai-thinker.com/esp32-audio-kit-factory-bin
There are t...
Transformer classic article, from Cangqiong Electronics Network. Contains an overview of transformers, the principle of transformers, transformer material introduction, transformer manufacturing proce...
Since the Kaluga board uses ESP32S2 as the main controller, it is natural to use Wi-Fi.
1. TCP client caseThe examples included in IDF include the tcp client example, namely "..\esp-idf-v4.4\examples\...