DFXXCC1

Automation and monitoring of industrial assets, systems, processes, and environments are increasingly important in the manufacturing industry, including transportation, electronics, mining, and texti...[Details]

The initialization of CAN2 is OK as per the previous blog post. Things that need to be modified: //Configure the filter    CAN_FilterInitStructure.CAN_FilterNumber=14;    Why do you want to modify th...[Details]

In the early morning of today (23rd), some domestic Samsung mobile phone users reported on social platforms such as Weibo that their mobile phones encountered black screen, restart and garbled charac...[Details]

After the STM8 EEPROM is reset, if you want to write data, you must unlock it first, otherwise you will not be able to write data. Unlocking means writing to FLASH_DUKR in sequence: The first hardwar...[Details]

        Current probes measure the magnetic field generated by electrons moving within a wire. Within the range specifications of the current probe, the magnetic flux field around the conductor is co...[Details]

Compared with the situation in Q1 where most power battery companies saw an increase in revenue but no increase in profit, power battery companies are expected to reach a profit turning point in Q2 a...[Details]

In the field of industrial automation, PLC (Programmable Logic Controller) is a widely used controller. With the development of technology and changes in production needs, it is sometimes necessary...[Details]

Recently, SiC has achieved a number of application breakthroughs in the field of automotive power supplies : ● BorgWarner: supplies bidirectional 800V on- board chargers equipped with SiC technolog...[Details]

Jiwei.com reported on July 22 (by reporter Zhang Yiqun) The rivalry between Xiaomi and Gree does not seem to have stopped just because the famous 1 billion bet between Lei Jun and Dong Mingzhu was se...[Details]

With the advancement of technologies such as sensors , machine vision , and lidar, mobile robots that integrate these technologies have gradually become more stable in terms o...[Details]

　　The method of using a multimeter to determine whether a single-phase or three-phase motor is burned out is only applicable to small motors with a DC resistance of the coil winding of more than 1 oh...[Details]

As shown in the figure, the center frequency is F=3.4KHZ, the notch frequency is F=9.5kHZ, and the quality factor is Q=3.4. For high-frequency filters, the transfer coefficient is 0.1, for bandpass f...[Details]

The SJ5760 profiler is a fully automatic measuring device. The operator only needs to install the workpiece to be measured, set the start and end positions of the scan on the calibration software, an...[Details]

CCFL and LED are the only two backlight sources for LCDs. CCFL is a traditional backlight method, while LED, as a rising star in LCD backlight, is rapidly seizing the LCD backlight market. The...[Details]

Preface Service-oriented robots are playing an increasingly important role in society, and are widely seen in various fields such as transportation and warehousing logistics to home entert...[Details]