2010T6.3A250V

Because there was a problem with the hardware, that is, the external low-speed crystal oscillator was useless and could not be vibrated. Then I checked the posts on the Internet and found that the ST...[Details]

The simulation file contains the circuit diagram download address: http://www.51hei.com/bbs/dpj-20402-1.html  , you can use protues to see the effect directly The following is the source code...[Details]

1. Overview Cardiovascular disease is a common disease. With the acceleration of the pace of life and the improvement of living standards and health awareness, people need to monitor their...[Details]

1 Introduction There are many types of A/D converters, and different applications have different requirements for them. Some require high conversion rates, some require high precision, and some are ...[Details]

1. Basic GPIO configuration. Note that because the ordinary IO port is needed as the interrupt input port, the IO port multiplexing function is used. Therefore, the RCC_APB2Periph_AFIO clock must be ...[Details]

This paper focuses on the circuit design and related technical issues of realizing tire pressure monitoring system (TPMS). The TPMS system consists of a pressure sensor module and a central receiver. ...[Details]

Experimental requirements Code #include "ioCC2530.h"   #define D4 P1_1 #define D6 P1_4   unsigned char temp=0; //Receive command variable   //System clock switching function from 16M to 32M void Se...[Details]

To use 51 single-chip microcomputer to realize the running light operation I think is the first hands-on experiment for every beginner to learn single-chip microcomputer and understand embedded syste...[Details]

LCALL addr16 ; long call ACALL addr11; absolute call   1.LCALL addr16; transfer range 64KB, does not affect the flag bit. The following process is automatically completed during execution:         ...[Details]

Introduction     With the rapid development of the economy, the demand for electricity and the power load have increased dramatically. Harmonics, as the most important indicator in the current power ...[Details]

A long time ago, I saw the following topic on a forum: Use the I/O port of the microcontroller to control 8 LEDs. You are required to write a program to implement the following functions. 1. The 1s...[Details]

1. S3C244 clock system Keywords related to clock: Fin – external input crystal frequency, TQ2440 external crystal frequency is 12MHz; FCLK – for CPU core, i.e. the frequency of CPU core; HCLK – u...[Details]

R15 (PC) always points to the instruction being "fetched", not the instruction being "executed" or "decoded". Generally speaking, people usually agree to use the "instruction being executed as th...[Details]

1. Set up software simulation first. Refer to the chapter 2.4 Software Simulation in the STM32 incomplete manual. Example functionality:                                                    - ...[Details]

0 Introduction The controller is the main body of intelligent robots to process and control information, which directly determines the behavior and performance of the robot. In recent year...[Details]