[i=s]This post was last edited by qwqwqw2088 on 2021-3-12 08:47[/i]1. Import the netlist2. Draw the PCB borderThe PCB outline is placed in the Edge.Cuts layer.Descriptive comments can be placed as req...
Related articles :
【GD32L233C-START Review】02 Power-on and program download and debugging【GD32L233C-START Review】03 LED Operation and General Timing Function
【GD32L233C-START Review】04 External Interr...
I used PADS9.5 to generate the Gerber file. Before generating the Gerber file, the design had passed verification (connectivity, spacing, etc. were all normal). When generating the Gerber file, the si...
Burning multi-core and multi-image files
The GEL file here uses the DSP_C6678_MultiCoreBoot.gel file in the Images folder of the CD. Please install Python 2.x or above in advance. The installation pro...
[i=s]This post was last edited by Yufeng on 2020-8-4 19:20[/i]Board: Altera DE2-35
Functional description: The first test demo
Function: switch control light#源文件
# SW LEDR 在pin planer中配置
module part1 ...