MCP609T-I/ST amplifier basic information:
MCP609T-I/ST is an operational amplifier - Operational Amplifiers (Op Amps - Operational Amplifiers) from Microchip. It belongs to the MCP609 series of products.
MCP609T-I/ST amplifier core information:
The minimum operating temperature of the MCP609T-I/ST is - 40 C and the maximum operating temperature is + 85 C. The corresponding working power supply current is 25 uA. The output current of each channel is: 17 mA.
The MCP609T-I/ST has a power supply rejection ratio of 80 dB. (Power supply rejection ratio (PSRR): An indicator used to determine the impact of the amplifier output on the power supply. PSRR = 20log[(Ripple(in) / Ripple(out))], that is, the larger the value, the less the amplifier output is affected by the power input. The smaller it is. ) Its voltage gain is 121 dB. The gain bandwidth product (GBP, gain bandwidth product) of the MCP609T-I/ST is 155 kHz. As a parameter to simply measure the performance of the amplifier, if you are not only choosing your amplifier, you can use this as a relatively simple measure. index. The corresponding input voltage noise density is 38 nV/sqrt Hz and the corresponding input noise current density is 0.003 pA/sqrt Hz.
When a voltage difference of 250 uV is input between the input pins of the MCP609T-I/ST, the output voltage of the amplifier is 0V. (That is, its input bias voltage is 250 uV)
Related dimensions of MCP609T-I/ST:
The width of MCP609T-I/ST is: 4.4 mm, the length is 5 mm, and the total number of channels (Number of chanels): 4 Channels.
MCP609T-I/ST amplifier additional information:
Its more detailed single package form is: TSSOP-14. When suppliers on the market sell MCP609T-I/ST, they use the form: Reel.
MCP609T-I/ST amplifier basic information:
MCP609T-I/ST is an operational amplifier - Operational Amplifiers (Op Amps - Operational Amplifiers) from Microchip. It belongs to the MCP609 series of products.
MCP609T-I/ST amplifier core information:
The minimum operating temperature of the MCP609T-I/ST is - 40 C and the maximum operating temperature is + 85 C. The corresponding working power supply current is 25 uA. The output current of each channel is: 17 mA.
The MCP609T-I/ST has a power supply rejection ratio of 80 dB. (Power supply rejection ratio (PSRR): An indicator used to determine the impact of the amplifier output on the power supply. PSRR = 20log[(Ripple(in) / Ripple(out))], that is, the larger the value, the less the amplifier output is affected by the power input. The smaller it is. ) Its voltage gain is 121 dB. The gain bandwidth product (GBP, gain bandwidth product) of the MCP609T-I/ST is 155 kHz. As a parameter to simply measure the performance of the amplifier, if you are not only choosing your amplifier, you can use this as a relatively simple measure. index. The corresponding input voltage noise density is 38 nV/sqrt Hz and the corresponding input noise current density is 0.003 pA/sqrt Hz.
When a voltage difference of 250 uV is input between the input pins of the MCP609T-I/ST, the output voltage of the amplifier is 0V. (That is, its input bias voltage is 250 uV)
Related dimensions of MCP609T-I/ST:
The width of MCP609T-I/ST is: 4.4 mm, the length is 5 mm, and the total number of channels (Number of chanels): 4 Channels.
MCP609T-I/ST amplifier additional information:
Its more detailed single package form is: TSSOP-14. When suppliers on the market sell MCP609T-I/ST, they use the form: Reel.
Parameter Name | Attribute value |
EU restricts the use of certain hazardous substances | Compliant |
ECCN (US) | EAR99 |
Part Status | Active |
HTS | 8542.33.00.01 |
Type | Micropower Amplifier |
Manufacturer Type | Micropower Amplifier |
Number of Channels per Chip | 4 |
Rail to Rail | Rail to Rail Output |
Process Technology | CMOS |
Output Type | CMOS |
Maximum Input Offset Voltage (mV) | 0.25@5.5V |
Minimum Single Supply Voltage (V) | 2.5 |
Typical Single Supply Voltage (V) | 3|5 |
Maximum Single Supply Voltage (V) | 6 |
Maximum Input Offset Current (uA) | 0.000001(Typ)@5.5V |
Typical Input Bias Current (uA) | 0.000001@5.5V |
Maximum Quiescent Current (mA) | 0.1@5.5V |
Typical Output Current (mA) | 30(Max) |
Power Supply Type | Single |
Typical Slew Rate (V/us) | 0.08@5.5V |
Typical Input Noise Voltage Density (nV/rtHz) | 38@5.5V |
Typical Voltage Gain (dB) | 121 |
Typical Noninverting Input Current Noise Density (pA/rtHz) | 0.003@5.5V |
Minimum PSRR (dB) | 80 |
Minimum CMRR (dB) | 75 |
Minimum CMRR Range (dB) | 75 to 80 |
Typical Gain Bandwidth Product (MHz) | 0.155 |
Shut Down Support | No |
Minimum Operating Temperature (°C) | -40 |
Maximum Operating Temperature (°C) | 85 |
Supplier Temperature Grade | Industrial |
Packaging | Tape and Reel |
Pin Count | 14 |
Standard Package Name | SOP |
Supplier Package | TSSOP |
Mounting | Surface Mount |
Package Height | 1 |
Package Length | 5 |
Package Width | 4.4 |
PCB changed | 14 |
Lead Shape | Gull-wing |
MCP609T-I/ST | MCP609-I/P | MCP607T-I/ST | MCP607-I/ST | MCP609-I/ST | MCP607-I/SN | MCP609-I/SL | MCP609T-I/SL | PRA100C2383R0.1%0.05%31 | MCP607-I/P | |
---|---|---|---|---|---|---|---|---|---|---|
Description | Op Amp Quad Micropower Amplifier R-R O/P 6V Automotive 14-Pin TSSOP T/R | Op Amp Quad Micropower Amplifier R-R O/P 6V Automotive 14-Pin PDIP Tube | Op Amp Dual Micropower Amplifier R-R O/P 6V Automotive 8-Pin TSSOP T/R | Op Amp Dual Micropower Amplifier R-R O/P 6V Automotive 8-Pin TSSOP Tube | Op Amp Quad Micropower Amplifier R-R O/P 6V Automotive 14-Pin TSSOP Tube | Op Amp Dual Micropower Amplifier R-R O/P 6V Automotive 8-Pin SOIC N Tube | Op Amp Quad Micropower Amplifier R-R O/P 6V Automotive 14-Pin SOIC N Tube | Op Amp Quad Micropower Amplifier R-R O/P 6V Automotive 14-Pin SOIC N T/R | Array/Network Resistor, Bussed, Thin Film, 0.1W, 383ohm, 50V, 0.1% +/-Tol, -10,10ppm/Cel, 0806, | Op Amp Dual Micropower Amplifier R-R O/P 6V Automotive 8-Pin PDIP Tube |
EU restricts the use of certain hazardous substances | Compliant | Compliant | - | Compliant | Compliant | Compliant | - | - | - | Compliant |
ECCN (US) | EAR99 | EAR99 | - | EAR99 | EAR99 | EAR99 | - | - | - | EAR99 |
Part Status | Active | Active | - | Active | Active | Active | - | - | - | Active |
HTS | 8542.33.00.01 | 8542.33.00.01 | - | 8542.33.00.01 | 8542.33.00.01 | 8542.33.00.01 | - | - | - | 8542.33.00.01 |
Type | Micropower Amplifier | Micropower Amplifier | - | Micropower Amplifier | Micropower Amplifier | Micropower Amplifier | - | - | - | Micropower Amplifier |
Manufacturer Type | Micropower Amplifier | Micropower Amplifier | - | Micropower Amplifier | Micropower Amplifier | Micropower Amplifier | - | - | - | Micropower Amplifier |
Number of Channels per Chip | 4 | 4 | - | 2 | 4 | 2 | - | - | - | 2 |
Rail to Rail | Rail to Rail Output | Rail to Rail Output | - | Rail to Rail Output | Rail to Rail Output | Rail to Rail Output | - | - | - | Rail to Rail Output |
Process Technology | CMOS | CMOS | - | CMOS | CMOS | CMOS | - | - | - | CMOS |
Output Type | CMOS | CMOS | - | CMOS | CMOS | CMOS | - | - | - | CMOS |
Maximum Input Offset Voltage (mV) | 0.25@5.5V | 0.25@5.5V | - | 0.25@5.5V | 0.25@5.5V | 0.25@5.5V | - | - | - | 0.25@5.5V |
Minimum Single Supply Voltage (V) | 2.5 | 2.5 | - | 2.5 | 2.5 | 2.5 | - | - | - | 2.5 |
Typical Single Supply Voltage (V) | 3|5 | 3|5 | - | 3|5 | 3|5 | 3|5 | - | - | - | 3|5 |
Maximum Single Supply Voltage (V) | 6 | 6 | - | 6 | 6 | 6 | - | - | - | 6 |
Maximum Input Offset Current (uA) | 0.000001(Typ)@5.5V | 0.000001(Typ)@5.5V | - | 0.000001(Typ)@5.5V | 0.000001(Typ)@5.5V | 0.000001(Typ)@5.5V | - | - | - | 0.000001(Typ)@5.5V |
Typical Input Bias Current (uA) | 0.000001@5.5V | 0.000001@5.5V | - | 0.000001@5.5V | 0.000001@5.5V | 0.000001@5.5V | - | - | - | 0.000001@5.5V |
Maximum Quiescent Current (mA) | 0.1@5.5V | 0.1@5.5V | - | 0.05@5.5V | 0.1@5.5V | 0.05@5.5V | - | - | - | 0.05@5.5V |
Typical Output Current (mA) | 30(Max) | 30(Max) | - | 30(Max) | 30(Max) | 30(Max) | - | - | - | 30(Max) |
Power Supply Type | Single | Single | - | Single | Single | Single | - | - | - | Single |
Typical Slew Rate (V/us) | 0.08@5.5V | 0.08@5.5V | - | 0.08@5.5V | 0.08@5.5V | 0.08@5.5V | - | - | - | 0.08@5.5V |
Typical Input Noise Voltage Density (nV/rtHz) | 38@5.5V | 38@5.5V | - | 38@5.5V | 38@5.5V | 38@5.5V | - | - | - | 38@5.5V |
Typical Voltage Gain (dB) | 121 | 121 | - | 121 | 121 | 121 | - | - | - | 121 |
Typical Noninverting Input Current Noise Density (pA/rtHz) | 0.003@5.5V | 0.003@5.5V | - | 0.003@5.5V | 0.003@5.5V | 0.003@5.5V | - | - | - | 0.003@5.5V |
Minimum PSRR (dB) | 80 | 80 | - | 80 | 80 | 80 | - | - | - | 80 |
Minimum CMRR (dB) | 75 | 75 | - | 75 | 75 | 75 | - | - | - | 75 |
Minimum CMRR Range (dB) | 75 to 80 | 75 to 80 | - | 75 to 80 | 75 to 80 | 75 to 80 | - | - | - | 75 to 80 |
Typical Gain Bandwidth Product (MHz) | 0.155 | 0.155 | - | 0.155 | 0.155 | 0.155 | - | - | - | 0.155 |
Shut Down Support | No | No | - | No | No | No | - | - | - | No |
Minimum Operating Temperature (°C) | -40 | -40 | - | -40 | -40 | -40 | - | - | - | -40 |
Maximum Operating Temperature (°C) | 85 | 85 | - | 85 | 85 | 85 | - | - | - | 85 |
Supplier Temperature Grade | Industrial | Industrial | - | Industrial | Industrial | Industrial | - | - | - | Industrial |
Packaging | Tape and Reel | Tube | - | Tube | Tube | Tube | - | - | - | Tube |
Pin Count | 14 | 14 | - | 8 | 14 | 8 | - | - | - | 8 |
Standard Package Name | SOP | DIP | - | SOP | SOP | SOP | - | - | - | DIP |
Supplier Package | TSSOP | PDIP | - | TSSOP | TSSOP | SOIC N | - | - | - | PDIP |
Mounting | Surface Mount | Through Hole | - | Surface Mount | Surface Mount | Surface Mount | - | - | - | Through Hole |
Package Height | 1 | 3.3 | - | 1 | 1 | 1.25(Min) | - | - | - | 3.3 |
Package Length | 5 | 19.05 | - | 3 | 5 | 4.9 | - | - | - | 9.27 |
Package Width | 4.4 | 6.35 | - | 4.4 | 4.4 | 3.9 | - | - | - | 6.35 |
PCB changed | 14 | 14 | - | 8 | 14 | 8 | - | - | - | 8 |
Lead Shape | Gull-wing | Through Hole | - | Gull-wing | Gull-wing | Gull-wing | - | - | - | Through Hole |