Basic information of LM13700AN amplifier:
LM13700AN is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP16,.3
LM13700AN amplifier core information:
The minimum operating temperature of the LM13700AN is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 7 µA Its maximum average bias current is 7 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the LM13700AN has a nominal slew rate of 50 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LM13700AN gain becomes 0.707 times the low-frequency gain is 2000 kHz.
The nominal supply voltage of the LM13700AN is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the LM13700AN is 2000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of LM13700AN:
The width of LM13700AN is: 7.62 mm and the length is 21.755 mm. LM13700AN has 16 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.
LM13700AN amplifier additional information:
LM13700AN adopts the TRANSCODUCTANCE architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of LM13700AN is: YES. Its temperature grade is: COMMERCIAL. The LM13700AN is not Rohs certified.
The corresponding JESD-30 code is: R-PDIP-T16. The corresponding JESD-609 code is: e0. The packaging code of LM13700AN is: DIP. The materials used in the LM13700AN package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.
The LM13700AN package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.
Basic information of LM13700AN amplifier:
LM13700AN is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP16,.3
LM13700AN amplifier core information:
The minimum operating temperature of the LM13700AN is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 7 µA Its maximum average bias current is 7 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the LM13700AN has a nominal slew rate of 50 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LM13700AN gain becomes 0.707 times the low-frequency gain is 2000 kHz.
The nominal supply voltage of the LM13700AN is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the LM13700AN is 2000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of LM13700AN:
The width of LM13700AN is: 7.62 mm and the length is 21.755 mm. LM13700AN has 16 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.
LM13700AN amplifier additional information:
LM13700AN adopts the TRANSCODUCTANCE architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of LM13700AN is: YES. Its temperature grade is: COMMERCIAL. The LM13700AN is not Rohs certified.
The corresponding JESD-30 code is: R-PDIP-T16. The corresponding JESD-609 code is: e0. The packaging code of LM13700AN is: DIP. The materials used in the LM13700AN package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.
The LM13700AN package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.
| Parameter Name | Attribute value |
| Is it Rohs certified? | incompatible |
| Maker | Texas Instruments |
| package instruction | DIP, DIP16,.3 |
| Reach Compliance Code | unknown |
| ECCN code | EAR99 |
| Is Samacsys | N |
| Amplifier type | OPERATIONAL AMPLIFIER |
| Architecture | TRANSCONDUCTANCE |
| Maximum average bias current (IIB) | 7 µA |
| Maximum bias current (IIB) at 25C | 7 µA |
| Minimum Common Mode Rejection Ratio | 80 dB |
| Nominal Common Mode Rejection Ratio | 110 dB |
| frequency compensation | YES |
| Maximum input offset voltage | 2000 µV |
| JESD-30 code | R-PDIP-T16 |
| JESD-609 code | e0 |
| length | 21.755 mm |
| low-dissonance | NO |
| Negative supply voltage upper limit | -22 V |
| Nominal Negative Supply Voltage (Vsup) | -15 V |
| Number of functions | 2 |
| Number of terminals | 16 |
| Maximum operating temperature | 70 °C |
| Minimum operating temperature | |
| Package body material | PLASTIC/EPOXY |
| encapsulated code | DIP |
| Encapsulate equivalent code | DIP16,.3 |
| Package shape | RECTANGULAR |
| Package form | IN-LINE |
| Peak Reflow Temperature (Celsius) | NOT SPECIFIED |
| power supply | +-15 V |
| Certification status | Not Qualified |
| Maximum seat height | 5.08 mm |
| Nominal slew rate | 50 V/us |
| Supply voltage upper limit | 22 V |
| Nominal supply voltage (Vsup) | 15 V |
| surface mount | NO |
| technology | BIPOLAR |
| Temperature level | COMMERCIAL |
| Terminal surface | Tin/Lead (Sn/Pb) |
| Terminal form | THROUGH-HOLE |
| Terminal pitch | 2.54 mm |
| Terminal location | DUAL |
| Maximum time at peak reflow temperature | NOT SPECIFIED |
| Nominal Uniform Gain Bandwidth | 2000 kHz |
| width | 7.62 mm |
| Base Number Matches | 1 |
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
circle
京公网安备 11010802033920号
EEWORLD