ISL55191IRZ-T7

ISL55191IRZ-T7 amplifier basic information:

ISL55191IRZ-T7 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are HVSON, SOLCC8,.11,20

ISL55191IRZ-T7 amplifier core information:

The ISL55191IRZ-T7 has a minimum operating temperature of -40 °C and a maximum operating temperature of 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 19 µA Its maximum average bias current is 19 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the ISL55191IRZ-T7 has a nominal slew rate of 240 V/us. The manufacturer specifies a maximum slew rate of 9 mA for the ISL55191IRZ-T7 and a minimum slew rate of 150 V/us. Its minimum voltage gain is 17780. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL55191IRZ-T7 gain becomes 0.707 times the low-frequency gain is 800000 kHz. The ISL55191IRZ-T7 has NO power. Its programmable power is NO.

The nominal supply voltage of the ISL55191IRZ-T7 is 5 V, and its corresponding nominal negative supply voltage is. The input offset voltage of the ISL55191IRZ-T7 is 800 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the op amp 0V (or close to 0V).)

Related dimensions of ISL55191IRZ-T7:

The width of ISL55191IRZ-T7 is: 2 mm and the length is 3 mm. ISL55191IRZ-T7 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.5 mm. Total pins: 8

ISL55191IRZ-T7 amplifier additional information:

ISL55191IRZ-T7 adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It belongs to the low offset class of amplifiers. The frequency compensation status of ISL55191IRZ-T7 is: YES. Its temperature grade is: INDUSTRIAL.

It is not a micropower amplifier. The ISL55191IRZ-T7 is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: S-PDSO-N8. The corresponding JESD-609 code is: e3.

The packaging code of ISL55191IRZ-T7 is: HVSON. The materials of the ISL55191IRZ-T7 package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The ISL55191IRZ-T7 package pin forms are: SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE. Its terminal forms are: NO LEAD.