INA2141P

Basic information of INA2141P amplifier:

INA2141P is an INSTRUMENTATION AMPLIFIER from Texas Instruments. Commonly used packaging methods are PLASTIC, DIP-16

INA2141P amplifier core information:

The minimum operating temperature of the INA2141P is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.005 µA while its maximum input offset current (IIO) is only 0.005 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of INA2141P is 4 V/us. The maximum slew rate of the INA2141P given by the manufacturer is 3.2 mA. Its maximum voltage gain is 100 and its minimum voltage gain is 10. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the INA2141P gain becomes 0.707 times the low-frequency gain is 1 MHz.

The nominal supply voltage of the INA2141P is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of INA2141P is 100 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of INA2141P:

The width of INA2141P is: 7.62 mm and the length is 19.305 mm. INA2141P has 16 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 16

INA2141P amplifier additional information:

Its temperature grade is: INDUSTRIAL. INA2141P is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDIP-T16. The packaging code of INA2141P is: DIP.

INA2141P packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The INA2141P package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.