HS9-2510RH-Q

Basic information of HS9-2510RH-Q amplifier:

HS9-2510RH-Q is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DFP, FL14,.3

HS9-2510RH-Q amplifier core information:

The minimum operating temperature of HS9-2510RH-Q is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT APPLICABLE Its maximum bias current at 25°C is: 0.2 µA Its maximum average bias current is 0.2 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of HS9-2510RH-Q is 65 V/us. The maximum slew rate of the HS9-2510RH-Q given by the manufacturer is 6.5 mA, while the minimum slew rate is 45 V/us. Its minimum voltage gain is 7500. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the HS9-2510RH-Q gain becomes 0.707 times the low-frequency gain is 12000 kHz.

The nominal supply voltage of HS9-2510RH-Q is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of HS9-2510RH-Q is 8000 µV (Input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) Width of HS9-2510RH-Q is: 6.285 mm.

Related dimensions of HS9-2510RH-Q:

HS9-2510RH-Q has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 14

HS9-2510RH-Q amplifier additional information:

HS9-2510RH-Q adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of HS9-2510RH-Q is: YES. Its temperature grade is: MILITARY. HS9-2510RH-Q is not Rohs certified.

The corresponding JESD-30 code is: R-CDFP-F14. The corresponding JESD-609 code is: e0. The packaging code of HS9-2510RH-Q is: DFP. The materials used in the HS9-2510RH-Q package are mostly CERAMIC and METAL-SEALED COFIRED. The package shape is RECTANGULAR.

The HS9-2510RH-Q package pin format is: FLATPACK. Its terminal form is: FLAT. The maximum seat height is 2.92 mm.