MAX4122EUK+

Basic information about MAX4122EUK+ amplifier:

MAX4122EUK+ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are LSSOP, TSOP5/6,.11,37

MAX4122EUK+ amplifier core information:

The MAX4122EUK+ has a minimum operating temperature of -40 °C and a maximum operating temperature of 85 °C. Its peak reflow temperature is 260°C. Its maximum bias current at 25°C is: 0.15 µA. Its maximum average bias current is 0.16 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MAX4122EUK+ has a nominal slew rate of 2 V/us. The maximum slew rate of the MAX4122EUK+ given by the manufacturer is 0.85 mA. Its minimum voltage gain is 2511.9. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MAX4122EUK+ gain becomes 0.707 times the low-frequency gain is 5000 kHz. The power of the MAX4122EUK+ is NO. Its programmable power is NO.

The nominal supply voltage of the MAX4122EUK+ is 6.5 V, and its corresponding nominal negative supply voltage is. The power supply range is: 2.7/6.5 V. The input offset voltage of the MAX4122EUK+ is 3500 µV (Input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)

Related dimensions of MAX4122EUK+:

The width of MAX4122EUK+ is: 1.625 mm and the length is 2.9 mm. MAX4122EUK+ has 5 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.95 mm. Total pins: 5

MAX4122EUK+ amplifier additional information:

MAX4122EUK+ adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of MAX4122EUK+ is: YES. Its temperature grade is: INDUSTRIAL.

And its humidity sensitivity level is: 1. It is a micropower amplifier. The MAX4122EUK+ is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-PDSO-G5.

The corresponding JESD-609 code is: e3. The packaging code of MAX4122EUK+ is: LSSOP. The materials used in the MAX4122EUK+ package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The MAX4122EUK+ package pin forms are: SMALL OUTLINE, LOW PROFILE, SHRINK PITCH.

Its terminal forms are: GULL WING. The maximum seat height is 1.45 mm.