TLC2652AI-14DR

Basic information of TLC2652AI-14DR amplifier:

TLC2652AI-14DR is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are GREEN, PLASTIC, SOIC-14

TLC2652AI-14DR amplifier core information:

The TLC2652AI-14DR has a minimum operating temperature of -40 °C and a maximum operating temperature of 85 °C. Maximum bias current at 25°C: 0.00006 µA Maximum average bias current is 0.00015 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLC2652AI-14DR has a nominal slew rate of 2.8 V/us. The maximum slew rate of the TLC2652AI-14DR given by the manufacturer is 2.5 mA, while the minimum slew rate is 1.4 V/us. Its minimum voltage gain is 1778279.4. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLC2652AI-14DR gain becomes 0.707 times the low-frequency gain is 1900 kHz. The power of TLC2652AI-14DR is NO. Its programmable power is NO.

The nominal supply voltage of the TLC2652AI-14DR is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the TLC2652AI-14DR is 2.95 µV (input offset voltage: the compensation voltage required between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLC2652AI-14DR:

The width of TLC2652AI-14DR is: 3.9 mm and the length is 8.65 mm. TLC2652AI-14DR has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 14

TLC2652AI-14DR amplifier additional information:

TLC2652AI-14DR adopts CHOPPER-STAB architecture. It belongs to the low-bias class of amplifiers. It belongs to the low offset class of amplifiers. The frequency compensation status of TLC2652AI-14DR is: YES. Its temperature grade is: INDUSTRIAL.

It is not a micropower amplifier. The corresponding JESD-30 code is: R-PDSO-G14. The corresponding JESD-609 code is: e4. The packaging code of TLC2652AI-14DR is: SOP. The materials used in the TLC2652AI-14DR package are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. TLC2652AI-14DR package pin formats are: SMALL OUTLINE. Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.