LH2310D

Basic information of LH2310D amplifier:

LH2310D is a BUFFER. Commonly used packaging methods are DIP, DIP16,.3

LH2310D amplifier core information:

The minimum operating temperature of LH2310D is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.007 µA Its maximum average bias current is 0.01 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of LH2310D is 30 V/us. The maximum slew rate of LH2310D given by the manufacturer is 11 mA. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of LH2310D becomes 0.707 times the low-frequency gain. The frequency is 20 MHz.

The nominal supply voltage of the LH2310D is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of LH2310D is 10000 µV (input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of LH2310D is: 7.62 mm.

Related dimensions of LH2310D:

LH2310D has 16 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.

LH2310D amplifier additional information:

Its temperature grade is: COMMERCIAL. The LH2310D is not Rohs certified. The corresponding JESD-30 code is: R-CDIP-T16. The corresponding JESD-609 code is: e0. The package code of LH2310D is: DIP.

The materials used in the LH2310D package are mostly CERAMIC, METAL-SEALED COFIRED. The package shape is RECTANGULAR. The LH2310D package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 4.672 mm.