KM4112IT5

Basic information of KM4112IT5 amplifier:

KM4112IT5 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are EIAJ, SC-74A, SOT-23, 5 PIN

KM4112IT5 amplifier core information:

The minimum operating temperature of KM4112IT5 is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.25 µA Its maximum average bias current is 0.25 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the KM4112IT5 has a nominal slew rate of 7 V/us. The maximum slew rate of KM4112IT5 given by the manufacturer is 0.1 mA. Its minimum voltage gain is 1800. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the KM4112IT5 gain becomes 0.707 times the low frequency gain is 3500 kHz. The power of KM4112IT5 is NO. Its programmable power is NO.

The nominal supply voltage of KM4112IT5 is 2.7 V, and its corresponding nominal negative supply voltage is. The input offset voltage of KM4112IT5 is 5000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Relevant dimensions of KM4112IT5:

The width of KM4112IT5 is: 1.625 mm and the length is 2.95 mm. KM4112IT5 has 5 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.95 mm. Total pins: 5

KM4112IT5 amplifier additional information:

KM4112IT5 adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of KM4112IT5 is: YES. Its temperature grade is: INDUSTRIAL.

It is a micropower amplifier. The KM4112IT5 is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G5. The corresponding JESD-609 code is: e0. The packaging code of KM4112IT5 is: LSSOP.

The materials used in the KM4112IT5 package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The KM4112IT5 package pin forms are: SMALL OUTLINE, LOW PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.45 mm.