LT1102MJ

Basic information about LT1102MJ amplifier:

LT1102MJ is an INSTRUMENTATION AMPLIFIER. The commonly used packaging method is CERDIP-8

LT1102MJ amplifier core information:

The minimum operating temperature of the LT1102MJ is -55 °C and the maximum operating temperature is 125 °C. Its maximum average bias current is 0.00006 µA and its maximum input offset current (IIO) is only 0.00006 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LT1102MJ has a nominal slew rate of 17 V/us. The maximum slew rate of LT1102MJ given by the manufacturer is 5.6 mA. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of LT1102MJ becomes 0.707 times of the low-frequency gain. The frequency is 0.22 MHz.

The nominal supply voltage of the LT1102MJ is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of LT1102MJ is 900 µV (input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of LT1102MJ is: 7.62 mm.

Related dimensions of LT1102MJ:

LT1102MJ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

LT1102MJ amplifier additional information:

Its temperature grade is: MILITARY. The LT1102MJ is not Rohs certified. The corresponding JESD-30 code is: R-GDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of LT1102MJ is: DIP.

LT1102MJ封装的材料多为CERAMIC, GLASS-SEALED。而其封装形状为RECTANGULAR。LT1102MJ封装引脚的形式有：IN-LINE。其端子形式有：THROUGH-HOLE。座面最大高度为5.08 mm。