NJU7031V(TE1)

Basic information of NJU7031V(TE1) amplifier:

NJU7031V(TE1) is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are LSSOP, TSSOP8,.25

NJU7031V(TE1) amplifier core information:

The minimum operating temperature of NJU7031V(TE1) is -20 °C and the maximum operating temperature is 75 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.000001 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of NJU7031V (TE1) is 3.5 V/us. The maximum slew rate of NJU7031V (TE1) given by the manufacturer is 2 mA. Its minimum voltage gain is 10000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the NJU7031V (TE1) gain becomes 0.707 times the low-frequency gain is 1500 kHz.

The nominal supply voltage of NJU7031V(TE1) is 10 V. The range of its power supply is: 10 V. The input offset voltage of NJU7031V (TE1) is 10000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of NJU7031V(TE1):

The width of NJU7031V(TE1) is: 3.5 mm and the length is 4.4 mm. NJU7031V(TE1) has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

Other information about NJU7031V(TE1) amplifier:

NJU7031V(TE1) adopts VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of NJU7031V (TE1) is: YES. Its temperature grade is: COMMERCIAL EXTENDED.

NJU7031V(TE1) does not comply with Rohs certification. It does not contain lead. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e6. The packaging code of NJU7031V (TE1) is: LSSOP.

The packaging materials of NJU7031V (TE1) are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. NJU7031V (TE1) package pin formats are: SMALL OUTLINE, LOW PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.45 mm.