TLC25M4CPW

Basic information of TLC25M4CPW amplifier:

TLC25M4CPW is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, TSSOP-14

TLC25M4CPW amplifier core information:

The minimum operating temperature of the TLC25M4CPW is and the maximum operating temperature is 70 °C. Its peak reflow temperature is 220°C and its maximum average bias current is 0.00006 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLC25M4CPW has a nominal slew rate of 0.43 V/us. The maximum slew rate of the TLC25M4CPW given by the manufacturer is 1.6 mA. Its minimum voltage gain is 15000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLC25M4CPW gain becomes 0.707 times the low-frequency gain is 525 kHz.

The nominal supply voltage of the TLC25M4CPW is 5 V. The power supply range is: 1.4/16 V. The input offset voltage of the TLC25M4CPW is 12000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLC25M4CPW:

The width of TLC25M4CPW is: 4.4 mm and the length is 5 mm. TLC25M4CPW has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 14

TLC25M4CPW amplifier additional information:

TLC25M4CPW adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TLC25M4CPW is: YES. Its temperature grade is: COMMERCIAL.

And its humidity sensitivity level is: 1. It is a micropower amplifier. The TLC25M4CPW is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDSO-G14.

The corresponding JESD-609 code is: e4. The packaging code of TLC25M4CPW is: TSSOP. The materials used in the TLC25M4CPW package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. TLC25M4CPW package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH.

Its terminal forms are: GULL WING. The maximum seat height is 1.2 mm.