LM108J-8

Basic information of LM108J-8 amplifier:

LM108J-8 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are CERAMIC, DIP-8

LM108J-8 amplifier core information:

The minimum operating temperature of the LM108J-8 is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.002 µA Its maximum average bias current is 0.003 µA

The maximum slew rate of the LM108J-8 given by the manufacturer is 0.6 mA. Its minimum voltage gain is 25000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LM108J-8 gain becomes 0.707 times the low-frequency gain is 1000 kHz.

The nominal supply voltage of the LM108J-8 is 20 V, and its corresponding nominal negative supply voltage is -20 V. The power supply range is: +-5/+-20 V. The input offset voltage of LM108J-8 is 3000 µV (Input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of LM108J-8 is: 7.62 mm .

Related dimensions of LM108J-8:

LM108J-8 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

LM108J-8 amplifier additional information:

LM108J-8 adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of LM108J-8 is: NO. Its temperature grade is: MILITARY. The LM108J-8 is not Rohs certified.

The corresponding JESD-30 code is: R-GDIP-T8. The corresponding JESD-609 code is: e0. The package code of LM108J-8 is: DIP. The materials of LM108J-8 package are mostly CERAMIC, GLASS-SEALED. The package shape is RECTANGULAR.

The LM108J-8 package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.