LT1001CS8

Basic information of LT1001CS8 amplifier:

LT1001CS8 is an OPERATIONAL AMPLIFIER. The commonly used packaging method is SO-8

LT1001CS8 amplifier core information:

The minimum operating temperature of the LT1001CS8 is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.004 µA Its maximum average bias current is 0.0055 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LT1001CS8 has a nominal slew rate of 0.25 V/us. The manufacturer specifies a maximum slew rate for the LT1001CS8 of 2.5 mA and a minimum slew rate of 0.1 V/us. Its minimum voltage gain is 250000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LT1001CS8 gain becomes 0.707 times the low-frequency gain is 800 kHz.

The nominal supply voltage of the LT1001CS8 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The power supply range is: +-15 V. The input offset voltage of the LT1001CS8 is 110 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LT1001CS8:

The width of LT1001CS8 is: 3.9 mm and the length is 4.9 mm. LT1001CS8 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

LT1001CS8 amplifier additional information:

LT1001CS8 adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low offset class of amplifiers. The frequency compensation status of LT1001CS8 is: YES. Its temperature grade is: COMMERCIAL. The LT1001CS8 is not Rohs certified.

The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e0. The packaging code of LT1001CS8 is: SOP. The materials used in the LT1001CS8 package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The LT1001CS8 package pin forms are: SMALL OUTLINE. Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.