Part Number | Manufacturer | Description |
---|---|---|
TL062CP | Texas Instruments | Dual Low-Power JFET-Input General-Purpose Operational Amplifier 8-PDIP 0 to 70 |
Basic information of TL062CP amplifier:
TL062CP is an OPERATIONAL AMPLIFIER. The commonly used packaging method is DIP-8
TL062CP amplifier core information:
The minimum operating temperature of TL062CP is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.0004 µA Its maximum average bias current is 0.01 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of TL062CP is 6 V/us. The maximum slew rate of the TL062CP given by the manufacturer is 0.5 mA, while the minimum slew rate is 2 V/us. Its minimum voltage gain is 3000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TL062CP gain becomes 0.707 times the low-frequency gain is 2000 kHz.
The nominal supply voltage of TL062CP is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of TL062CP is 20000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of TL062CP:
The width of TL062CP is: 7.62 mm and the length is 9.78 mm. TL062CP has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8
TL062CP amplifier additional information:
TL062CP adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TL062CP is: YES. Its temperature grade is: COMMERCIAL.
It is a micropower amplifier. TL062CP is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0.
The packaging code of TL062CP is: DIP. The materials used in TL062CP packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The TL062CP package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.
The maximum seat height is 4.45 mm.
TL062CP Also View
You may also be interested in
Popular Searches
Technical Videos