MAX427CPA+

MAX427CPA+ amplifier basic information:

MAX427CPA+ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, DIP-8

MAX427CPA+ amplifier core information:

The minimum operating temperature of the MAX427CPA+ is 70 °C. Its peak reflow temperature is 260°C. Its maximum bias current at 25°C is: 0.035 µA. Its maximum average bias current is 0.06 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MAX427CPA+ has a nominal slew rate of 2.8 V/us. The manufacturer specifies a maximum slew rate of 4.7 mA for the MAX427CPA+ and a minimum slew rate of 1.7 V/us. Its minimum voltage gain is 3000000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MAX427CPA+ gain becomes 0.707 times the low-frequency gain is 8000 kHz.

The MAX427CPA+ has a nominal supply voltage of 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the MAX427CPA+ is 50 µV (Input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)

Related dimensions of MAX427CPA+:

The width of MAX427CPA+ is: 7.62 mm and the length is 9.375 mm. MAX427CPA+ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

MAX427CPA+ amplifier additional information:

MAX427CPA+ adopts VOLTAGE-FEEDBACK architecture. It belongs to the low offset class of amplifiers. The frequency compensation status of MAX427CPA+ is: YES. Its temperature grade is: COMMERCIAL. And its humidity sensitivity level is: 1.

The MAX427CPA+ is not Rohs certified. The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e3. The packaging code of MAX427CPA+ is: DIP. The materials used in the MAX427CPA+ package are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. The MAX427CPA+ package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 4.572 mm.