MAX4230AXK

Basic information about MAX4230AXK amplifier:

MAX4230AXK is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are MO-203, SC-70, 5 PIN

MAX4230AXK amplifier core information:

The MAX4230AXK operates at a minimum temperature of -40 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is NOT SPECIFIED

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MAX4230AXK has a nominal slew rate of 10 V/us. The maximum slew rate of the MAX4230AXK given by the manufacturer is 2.8 mA. Its minimum voltage gain is 2240. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MAX4230AXK gain becomes 0.707 times the low-frequency gain is 10000 kHz. The power of the MAX4230AXK is NO. Its programmable power is NO.

The nominal supply voltage of the MAX4230AXK is 5 V. The power supply range is: +-1.35/+-2.5/2.7/5 V. The input offset voltage of the MAX4230AXK is 8000 µV (Input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)

Related dimensions of MAX4230AXK:

The width of MAX4230AXK is: 1.25 mm and the length is 2 mm. MAX4230AXK has 5 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 5

Additional information about the MAX4230AXK amplifier:

MAX4230AXK adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of MAX4230AXK is: YES. Its temperature grade is: AUTOMOTIVE.

And its humidity sensitivity level is: 1. It is not a micropower amplifier. The MAX4230AXK is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDSO-G5.

The corresponding JESD-609 code is: e0. The packaging code of MAX4230AXK is: TSSOP. The materials used in the MAX4230AXK package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The MAX4230AXK package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH.

Its terminal forms are: GULL WING. The maximum seat height is 1.1 mm.