LF351J

Basic information of LF351J amplifier:

LF351J is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are CERAMIC, DIP-8

LF351J amplifier core information:

The minimum operating temperature of LF351J is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED, its maximum average bias current is 0.008 µA, and its maximum input offset current (IIO) is only 0.004 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LF351J has a nominal slew rate of 13 V/us. The maximum slew rate of LF351J given by the manufacturer is 3.4 mA. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of LF351J becomes 0.707 times the low-frequency gain. The frequency is 4000 kHz.

The nominal supply voltage of LF351J is 15 V, and its corresponding nominal negative supply voltage is -15 V. The power supply range is: +-15 V. The input offset voltage of LF351J is 13000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of LF351J is: 7.62 mm.

Related dimensions of LF351J:

LF351J has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

LF351J amplifier additional information:

LF351J adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of LF351J is: YES. Its temperature grade is: COMMERCIAL.

LF351J is not Rohs certified. The corresponding JESD-30 code is: R-GDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of LF351J is: DIP. The materials used in the LF351J package are mostly CERAMIC and GLASS-SEALED.

The package shape is RECTANGULAR. The LF351J package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.