PM1012AZ/883

Basic information of PM1012AZ/883 amplifier:

PM1012AZ/883 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are HERMETIC SEALED, CERDIP-8

PM1012AZ/883 amplifier core information:

The minimum operating temperature of PM1012AZ/883 is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.00015 µA Its maximum average bias current is 0.00035 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the PM1012AZ/883 has a nominal slew rate of 0.15 V/us. The maximum slew rate of the PM1012AZ/883 given by the manufacturer is 0.8 mA, while the minimum slew rate is 0.05 V/us. Its minimum voltage gain is 100000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the PM1012AZ/883 gain becomes 0.707 times the low-frequency gain is 500 kHz.

The nominal supply voltage of PM1012AZ/883 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of PM1012AZ/883 is 250 µV (Input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of PM1012AZ/883 is: 7.62 mm .

Relevant dimensions of PM1012AZ/883:

PM1012AZ/883 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

PM1012AZ/883 amplifier additional information:

PM1012AZ/883 adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It belongs to the low offset class of amplifiers. The frequency compensation status of PM1012AZ/883 is: YES. Its temperature grade is: MILITARY.

It is a micropower amplifier. PM1012AZ/883 does not comply with Rohs certification. It does not contain lead. The corresponding JESD-30 code is: R-GDIP-T8. The corresponding JESD-609 code is: e0.

The packaging code of PM1012AZ/883 is: DIP. The materials used in PM1012AZ/883 packaging are mostly CERAMIC and GLASS-SEALED. The package shape is RECTANGULAR. The PM1012AZ/883 package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.

The maximum seat height is 5.08 mm.