BDL36040LW

5962-88513012A amplifier basic information:

5962-88513012A is an OPERATIONAL AMPLIFIER from Analog Devices Inc. Commonly used packaging methods are QCCN, LCC20,.35SQ

5962-88513012A amplifier core information:

The minimum operating temperature of the 5962-88513012A is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT APPLICABLE. Its maximum bias current at 25°C is: 0.0002 µA. Its maximum average bias current is 0.0002 µA and its maximum input offset current (IIO) is only 0.001 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of 5962-88513012A is 52 V/us. The manufacturer specifies a maximum slew rate of 6 mA for the 5962-88513012A and a minimum slew rate of 40 V/us. Its minimum voltage gain is 80000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the 5962-88513012A gain becomes 0.707 times the low-frequency gain is 10000 kHz.

The nominal supply voltage of 5962-88513012A is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of 5962-88513012A is 1000 µV (Input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the op amp 0V (or close to 0V).)

Related dimensions of 5962-88513012A:

The width of 5962-88513012A is: 8.89 mm and the length is 8.89 mm. 5962-88513012A has 20 terminals. Its terminal position type is: QUAD. Terminal pitch is 1.27 mm. Total pins: 20

5962-88513012A amplifier additional information:

5962-88513012A adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of 5962-88513012A is: YES. Its temperature grade is: MILITARY.

5962-88513012A is not Rohs certified. It contains lead. The corresponding JESD-30 code is: S-CQCC-N20. The corresponding JESD-609 code is: e0. The packaging code of 5962-88513012A is: QCCN.

5962-88513012A封装的材料多为CERAMIC, METAL-SEALED COFIRED。而其封装形状为SQUARE。5962-88513012A封装引脚的形式有：CHIP CARRIER。其端子形式有：NO LEAD。座面最大高度为2.54 mm。