LH2108AD/883B

Basic information of LH2108AD/883B amplifier:

LH2108AD/883B is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP16,.3

LH2108AD/883B amplifier core information:

The minimum operating temperature of LH2108AD/883B is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.003 µA

The maximum slew rate of LH2108AD/883B given by the manufacturer is 0.6 mA. When the op amp is used in closed loop, under a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of LH2108AD/883B becomes a low-frequency gain. The frequency at 0.707 times is 1000 kHz. The power of LH2108AD/883B is NO. Its programmable power is NO.

The nominal supply voltage of LH2108AD/883B is 20 V, and its corresponding nominal negative supply voltage is -20 V. The power supply range is: +-5 V. The input offset voltage of LH2108AD/883B is 1000 µV (Input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of LH2108AD/883B is: 7.62 mm .

Relevant dimensions of LH2108AD/883B:

LH2108AD/883B has 16 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 16

LH2108AD/883B amplifier other information:

LH2108AD/883B adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of LH2108AD/883B is: NO. Its temperature grade is: MILITARY.

It is a micropower amplifier. LH2108AD/883B does not comply with Rohs certification. The corresponding JESD-30 code is: R-CDIP-T16. The corresponding JESD-609 code is: e0. The packaging code of LH2108AD/883B is: DIP.

LH2108AD/883B packaging materials are mostly CERAMIC, METAL-SEALED COFIRED. The package shape is RECTANGULAR. LH2108AD/883B package pin formats are: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 4.572 mm.