LT-1001ACN

Basic information of LT-1001ACN amplifier:

LT-1001ACN is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, DIP-8

LT-1001ACN amplifier core information:

The minimum operating temperature of LT-1001ACN is 70 °C. Maximum bias current at 25°C: 0.002 µA Maximum average bias current is 0.0035 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LT-1001ACN has a nominal slew rate of 0.3 V/us. The maximum slew rate of the LT-1001ACN given by the manufacturer is 5.7 mA, while the minimum slew rate is 0.1 V/us. Its minimum voltage gain is 300000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LT-1001ACN gain becomes 0.707 times the low-frequency gain is 800 kHz.

The nominal supply voltage of LT-1001ACN is 15 V, and its corresponding nominal negative supply voltage is -15 V. The power supply range is: +-15 V. The input offset voltage of LT-1001ACN is 60 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LT-1001ACN:

LT-1001ACN has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.

LT-1001ACN amplifier other information:

LT-1001ACN adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low offset class of amplifiers. The frequency compensation status of LT-1001ACN is: YES. Its temperature grade is: COMMERCIAL. LT-1001ACN is not Rohs certified.

The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of LT-1001ACN is: DIP. The materials used in LT-1001ACN packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The LT-1001ACN package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.