LM118D

Basic information of LM118D amplifier:

LM118D is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are MICRO, PLASTIC, SO-8

LM118D amplifier core information:

The minimum operating temperature of the LM118D is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.25 µA Its maximum average bias current is 0.5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LM118D has a nominal slew rate of 70 V/us. The manufacturer specifies a maximum slew rate for the LM118D of 15 mA and a minimum slew rate of 50 V/us. Its minimum voltage gain is 25000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LM118D gain becomes 0.707 times the low-frequency gain is 15000 kHz.

The nominal supply voltage of the LM118D is 20 V, and its corresponding nominal negative supply voltage is -20 V. The power supply range is: +-5/+-20 V. The input offset voltage of the LM118D is 6000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LM118D:

The width of LM118D is: 3.9 mm, the length is 4.9 mm. LM118D has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

LM118D amplifier additional information:

LM118D adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of LM118D is: YES. Its temperature grade is: MILITARY. The LM118D is not Rohs certified.

It contains lead. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e0. The package code of LM118D is: SOP. The materials used in the LM118D package are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. The LM118D package pin forms are: SMALL OUTLINE. Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.