LM146J

Basic information of LM146J amplifier:

LM146J is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP16,.3

LM146J amplifier core information:

The minimum operating temperature of the LM146J is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.1 µA Its maximum average bias current is 0.1 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LM146J has a nominal slew rate of 0.5 V/us. The manufacturer specifies a maximum slew rate of 2 mA for the LM146J and a minimum slew rate of 0.3 V/us. Its minimum voltage gain is 50000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LM146J gain becomes 0.707 times the low-frequency gain is 1000 kHz. Programmable power for the LM146J is YES.

The nominal supply voltage of the LM146J is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of LM146J is 5000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LM146J:

LM146J has 16 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 16

LM146J amplifier additional information:

LM146J adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of LM146J is: YES. Its temperature grade is: MILITARY. It is a micropower amplifier.

The LM146J is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-CDIP-T16. The corresponding JESD-609 code is: e0. The packaging code of LM146J is: DIP.

The materials used in the LM146J package are mostly CERAMIC, METAL-SEALED COFIRED. The package shape is RECTANGULAR. The LM146J package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.