LM2902N

Basic information of LM2902N amplifier:

LM2902N is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are ROHS COMPLIANT, PLASTIC, DIP-14

LM2902N amplifier core information:

The minimum operating temperature of the LM2902N is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LM2902N has a nominal slew rate of 0.5 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LM2902N gain becomes 0.707 times the low-frequency gain is 1200 kHz.

The nominal supply voltage of the LM2902N is 5 V. The upper limit of its supply voltage is 26. The input offset voltage of VLM2902N is 10000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LM2902N:

The width of LM2902N is: 7.62 mm and the length is 19.305 mm. LM2902N has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 14

LM2902N amplifier additional information:

Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: NOT APPLICABLE. The LM2902N is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-PDIP-T14.

The corresponding JESD-609 code is: e4. The packaging code of LM2902N is: DIP. The materials used in the LM2902N package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The LM2902N package pin format is: IN-LINE.

Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.