LMC6082AIN/NOPB

LMC6082AIN/NOPB amplifier basic information:

LMC6082AIN/NOPB is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3

LMC6082AIN/NOPB amplifier core information:

The LMC6082AIN/NOPB has a minimum operating temperature of -40 °C and a maximum operating temperature of 85 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.000004 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of LMC6082AIN/NOPB is 1.5 V/us. The manufacturer specifies a maximum slew rate of 2 mA for the LMC6082AIN/NOPB and a minimum slew rate of 0.6 V/us. Its minimum voltage gain is 50000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LMC6082AIN/NOPB gain becomes 0.707 times the low-frequency gain is 1300 kHz. The power of LMC6082AIN/NOPB is NO. Its programmable power is NO.

The nominal supply voltage of the LMC6082AIN/NOPB is 5 V, and its corresponding nominal negative supply voltage is. The power supply range is: 5/15 V. The input offset voltage of the LMC6082AIN/NOPB is 800 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LMC6082AIN/NOPB:

The width of LMC6082AIN/NOPB is: 7.62 mm and the length is 9.817 mm. LMC6082AIN/NOPB has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

LMC6082AIN/NOPB amplifier additional information:

LMC6082AIN/NOPB adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It belongs to the low offset class of amplifiers. The frequency compensation status of LMC6082AIN/NOPB is: YES. Its temperature grade is: INDUSTRIAL.

And its humidity sensitivity level is: 1. It is not a micropower amplifier. LMC6082AIN/NOPB is not Rohs certified. The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e3.

The packaging code of LMC6082AIN/NOPB is: DIP. LMC6082AIN/NOPB packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The LMC6082AIN/NOPB package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.

The maximum seat height is 5.08 mm.