HA3-2515-5

HA3-2515-5 amplifier basic information:

HA3-2515-5 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3

HA3-2515-5 amplifier core information:

The minimum operating temperature of HA3-2515-5 is 75 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.25 µA Its maximum average bias current is 0.5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of HA3-2515-5 is 60 V/us. The manufacturer specifies a maximum slew rate for the HA3-2515-5 of 6 mA and a minimum slew rate of 40 V/us. Its minimum voltage gain is 5000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the HA3-2515-5 gain becomes 0.707 times the low-frequency gain is 12000 kHz.

The nominal supply voltage of HA3-2515-5 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of HA3-2515-5 is 14000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of HA3-2515-5:

The width of HA3-2515-5 is: 7.62 mm and the length is 9.585 mm. HA3-2515-5 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

HA3-2515-5 amplifier additional information:

HA3-2515-5 adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of HA3-2515-5 is: YES. Its temperature grade is: COMMERCIAL EXTENDED. HA3-2515-5 is not Rohs certified.

The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0. The encapsulation code of HA3-2515-5 is: DIP. The materials used for HA3-2515-5 packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The form of HA3-2515-5 package pins is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.33 mm.