ISL28207FRTZ-T

ISL28207FRTZ-T amplifier basic information:

ISL28207FRTZ-T is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are 3 X 3 MM, ROHS COMPLIANT, PLASTIC, MO-229WEEC-2, TDFN-8

ISL28207FRTZ-T amplifier core information:

The ISL28207FRTZ-T has a minimum operating temperature of -40 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.0006 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of ISL28207FRTZ-T is 0.32 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL28207FRTZ-T gain becomes 0.707 times the low-frequency gain is 1000 kHz.

The nominal supply voltage of the ISL28207FRTZ-T is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the ISL28207FRTZ-T is 175 µV (Input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of ISL28207FRTZ-T:

The width of ISL28207FRTZ-T is: 3 mm and the length is 3 mm. ISL28207FRTZ-T has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

ISL28207FRTZ-T amplifier additional information:

Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: 3. ISL28207FRTZ-T is not Rohs compliant. The corresponding JESD-30 code is: S-PDSO-N8. The corresponding JESD-609 code is: e3.

The packaging code of ISL28207FRTZ-T is: HVSON. The materials for the ISL28207FRTZ-T package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The ISL28207FRTZ-T package pin formats are: SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE. Its terminal forms are: NO LEAD.

The maximum seat height is 0.8 mm.