UPC4570C(5)-A

UPC4570C(5)-A amplifier basic information:

UPC4570C(5)-A is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3

UPC4570C(5)-A amplifier core information:

The UPC4570C(5)-A has a minimum operating temperature of -20 °C and a maximum operating temperature of 80 °C. Its peak reflow temperature is 225°C. Its maximum bias current is: 0.4 µA. Its maximum average bias current is 0.4 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the UPC4570C(5)-A has a nominal slew rate of 7 V/us. The manufacturer specifies a maximum slew rate of 8 mA for the UPC4570C(5)-A and a minimum slew rate of 5 V/us. Its minimum voltage gain is 30000. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the UPC4570C(5)-A gain becomes 0.707 times the low frequency gain is 15000 kHz. UPC4570C(5)-A is rated NO power. Its programmable power is NO.

The UPC4570C(5)-A has a nominal supply voltage of 15 V, which corresponds to a nominal negative supply voltage of -15 V. The input offset voltage of UPC4570C(5)-A is 5000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the op amp 0V (or close to 0V).)

Related dimensions of UPC4570C(5)-A:

The width of UPC4570C(5)-A is: 7.62 mm and the length is 10.16 mmUPC4570C(5)-A has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

UPC4570C(5)-A amplifier additional information:

UPC4570C(5)-A adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of UPC4570C(5)-A is: YES. Its temperature grade is: COMMERCIAL EXTENDED.

And its humidity sensitivity level is: 1. It is not a micropower amplifier. UPC4570C(5)-A is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-PDIP-T8.

The corresponding JESD-609 code is: e3. The package code of UPC4570C(5)-A is: DIP. UPC4570C(5)-A packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The UPC4570C(5)-A package pin format is: IN-LINE.

Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.