ICL7642ECWE+T

Basic information of ICL7642ECWE+T amplifier:

ICL7642ECWE+T is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are 0.300 INCH, SO-16

ICL7642ECWE+T amplifier core information:

The minimum operating temperature of ICL7642ECWE+T is and the maximum operating temperature is 70 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.0005 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of ICL7642ECWE+T is 0.016 V/us. The maximum slew rate of ICL7642ECWE+T given by the manufacturer is 1 mA. When the op amp is used in closed loop, under a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of ICL7642ECWE+T becomes a low-frequency gain. The frequency at 0.707 times is 44 kHz.

The nominal supply voltage of ICL7642ECWE+T is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of ICL7642ECWE+T is 25000 µV (input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of ICL7642ECWE+T is: 7.6745 mm .

Related dimensions of ICL7642ECWE+T:

ICL7642ECWE+T has 16 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 16

ICL7642ECWE+T amplifier additional information:

Its temperature grade is: COMMERCIAL. And its humidity sensitivity level is: 1. ICL7642ECWE+T is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-PDSO-G16.

The corresponding JESD-609 code is: e3. The packaging code of ICL7642ECWE+T is: SOP. The materials used in the ICL7642ECWE+T package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The ICL7642ECWE+T package pin formats are: SMALL OUTLINE.

Its terminal forms are: GULL WING. The maximum seat height is 2.642 mm.