Apply LOGO! Lighting control circuit to realize multi-function switch a
Source: InternetPublisher:已注销 Keywords: switch control circuit lighting control Updated: 2021/06/17
The control circuit has the following functions:
① Press any switch, the lighting system is turned on;
② Press any switch again, the lighting system is turned off.
Disadvantages of using this method of control: People often forget to disconnect the lighting system.
When using the automatic device, its performance is as follows: @ Press any switch , the lighting system is on; ② After the preset time
, the lighting system is automatically turned off.
- A small improvement to the temperature and water level indicator alarm
- Controlling stepper motors with wireless remote control transceiver and PE-51 board
- Motor control circuit for starting and running without phase loss
- Hydraulic control circuit design and analysis
- Design and manufacture of three-phase motor protection circuit
- Audio interface protection circuit
- A novel and practical power line anti-theft and cutting alarm circuit
- High-sensitivity and high-loudness burglar alarm circuit
- Synthesize the forward and reverse control circuit of the motor using three AC contactors
- White noise electronic hypnotist
- Complementary voltage switching class D power amplifier circuit
- Loopback comparator circuit
- Electric shock debounce circuit
- Lighting switch automatic circuit
- Anti-shake circuit for operating switch
- Typical relaxation oscillator and its output voltage waveform
- Single pulse signal generating circuit f
- Single pulse signal generating circuit a
- 5V to 2.5V voltage stabilizing circuit
- Apply LOGO! Automatic gating circuit a