[Biosensor Evaluation Platform MAX30001GEVKIT] Host computer software installation and experience

qinyunti

[Biosensor Evaluation Platform MAX30001GEVKIT] Host computer software installation and experience [Copy link]

 

I. Introduction

We have learned about the development board before. Now let's install the software for testing. First, you should have a general understanding of the software usage, and then test the functions.

2. Install the software

You need to register an account to log in.

https://www.analog.com/cn/design-center/evaluation-hardware-and-software/software/software-download.html?swpart=sfw0016980b

download

MAX30001G EV System Software

MAX30001GGUISetupV312.zip

Unzip and double-click MAX30001GGUISetupV312.exe to install

Click for more information, and run anyway

The User Account Control dialog box pops up, click Yes

Specify the installation path, NEXT

Open the software from the desktop icon

3. Experience

Connect the USB cable to the computer. After power on, the red light on the control board flashes and the green power light on the bottom board is on.

The serial port can be seen in the device manager.

Open the software and select the corresponding serial port

Click the Connect button

The above tags configure the flow in order from left to right. First, you can roughly understand what is under each tag.

Plots can display data in real time

BioZ Bioimpedance

ECG

R-to-R is the interval between two R waves, that is, the interval between two heartbeats.

4. Suggestions

It would be better if there were instructions on how to test each function, including basic concepts and principles, how to attach leads, how to configure, how to interpret curves, etc. Currently, the document only has an introduction to the basic interface of the software, which is relatively simple.

wangerxian

Is that waveform an ECG? It doesn't look like it.

qinyunti

wangerxian posted on 2023-8-31 09:25 Is that waveform an ECG? It doesn’t look like one.

Not posted yet

秦天qintian0303

What indicator does BioZ bioimpedance mainly reflect?

lugl4313820

For this board, those who don’t have relevant professional basic knowledge don’t know what to play or what to play. It is estimated that there are relatively few compound talents.

qinyunti

lugl4313820 posted on 2023-9-1 10:26 For this board, those who don’t have relevant professional basic knowledge don’t know what to play and what to play. It is estimated that there are relatively few compound talents.

Yes, some application scenarios such as ECG require some expertise. But it is essentially an ADC. Learn while playing.

qinyunti

Qintianqintian0303 posted on 2023-9-1 09:03 What is the main indicator of BioZ bioimpedance?

My personal understanding is to measure impedance, add a driving signal to measure the current response (actually the voltage is measured through the sampling resistor), but the biological signals are generally very weak, at the 1mV level, so the ADC accuracy needs to be relatively high, such as 20 bits. In essence, the ADC collects signals.

lkh747566933

What kind of biosensor is this? I didn't see any introduction. What principle is it based on?

qinyunti

lkh747566933 posted on 2023-9-3 22:53 What kind of biosensor is this? I haven't seen any introduction. What principle is it based on?

ADI’s MAX30001G

lkh747566933

qinyunti posted on 2023-9-4 09:29 ADI's MAX30001G

OK, thanks for your reply, I'll do some research, I've never used this kind of chip.

daigc5208

Where is the host computer?

daigc5208

The file downloaded from the official website does not contain

chejm

This post has not been replied for a long time. Can any friend give some detailed information?