Application of ROOM in AD software

yjguohua

Application of ROOM in AD software [Copy link]

When AD makes PCB and copies room, there are always several components that cannot be copied together. What is the reason? ? ? How to solve it? ? ? See the several components in the green circle in the figure below. When I drag the corresponding room, these components cannot be dragged along.

btty038

Is it locked, or is the software itself unstable? I personally think,

yjguohua

btty038 Published on 2019-1-26 17:52 Is it locked, or is the software itself unstable? I personally think that

it is not locked, it should be related to some settings of the components, but I can't find the reason and how to solve it.

ddllxxrr

You can move it together in the room, but if you put it outside, what's the point of moving it?

qwqwqw2088

If the room is not set by you, just delete multiple modules before copying. After copying the shortcut key of the room, a cross will appear. If the dialog box appears and you select it again, it may be a software version problem.

btty038

yjguohua posted on 2019-1-26 18:18 It is not locked. It should be related to the settings of the components, but I can't find the reason and how to solve it.

Try a few more versions. After all, the software is pirated. You can only try it multiple times.

yjguohua

ddllxxrr posted on 2019-1-27 07:09 They can be moved together in the room, but if they are placed outside, what's the point of dragging them?

I use ROOM for multi-channel copying, and the purpose of dragging is to let everyone see that some individual components and their routing are not copied.

yjguohua

qwqwqw2088 posted on 2019-1-27 08:29 If it is not a room you set yourself, just delete the multiple modules before copying. After copying the shortcut key DMC of the room, a cross appears,,, a dialogue appears...

It is a room you set yourself, and you operate it in the same way. I have tried multiple versions. It may be a problem with the channel offset setting, but I haven't found a solution yet.

yjguohua

btty038 posted on 2019-1-27 16:18 Experiment with several versions. After all, the software is pirated. You can only try it multiple times

Well, I am still not familiar with the software.